User guide

160X SERIES
OMAX CORPORATION
21409 72nd Avenue South
Kent, WA 98032
TEL [phone]
FAX [phone]
WWW.OMAX.COM
Made in the USA
The OMAX Technology Guarantee
entitles you, as the original owner, to
free OMAX software upgrades for the
life of the machine.
Specications subject to change without notice.
600042B January 2014
MACHINE DIMENSIONS
Footprint (with controller)
35’ 0” x 22’ 6” to 55’ 0” x 22’ 6”
(10,688 mm x 6,858 mm to
16,764 mm x 6,858 mm)
Weight (tank empty)
21,000 lbs to 51,000 lbs
(9,525 kg to 23,133 kg)
Height (with scissor plumbing) 10’ 0” (3,658 mm)
Operating Weight
83,000 lbs to 199,000 lbs
(37,648 kg to 90,265 kg)
WORK ENVELOPE
X-Y Cutting Travel*
26’ 8” x 13’ 4” to 46’ 8” x 13’ 4”
(8,128 mm x 4,064 mm to
14,224 mm x 4,064 mm)
Z-Axis Travel (with Motorized Z-Axis)* 8” (203 mm)
Table Size
28’ 3” x 14’ 9” to 48’ 6” x 14’ 9”
(4,572 mm x 4,496 mm to
14,783 mm x 4,496 mm)
DRIVE DESCRIPTION
• Closed loop, digital drives
• Brushless servo motors
• Intelli-TRAX drive technology with
linear encoders in X-Axis
• Precise Motorized Z-Axis
ABOUT OMAX
OMAX is the global total solutions provider in advanced abrasive waterjet
systems. Our intuitive Intelli-MAX Software Suite simplies programming and
reduces setup times, increasing your productivity. OMAX engineers continue
to innovate technology for waterjet machining, from proven 4th generation
pump designs to cutting edge drive systems with micron-level accuracy. With
the largest abrasive waterjet support network in the world, OMAX continues to
shape the future of waterjets.
To see how an OMAX JetMachining Center can save you time and money, call
or visit our website and request a free part analysis today.
STANDARD MODEL SPECIFICATIONS
Material Support Slats 4" x 1/8" Galvanized Steel
Maximum Supported Material Load 400 lbs/sq ft (1,950 kg/sq meter)
Electrical Requirements
3-Phase, 380-480 VAC ±10%,
50-60 Hz
Noise Level
Below 80 dBA at one meter for
submerged cutting
Speed 180 in/min (4,572 mm/min)
Accuracy of Motion at 70˚ F
Ballbar Circularity
(Over 12”)
±0.005”
(±0.076 mm)
Repeatability
±0.002”
(±0.051 mm)
OPTIONAL ACCESSORIES
• Tilt-A-Jet
®
Cutting Head for taper
compensation
• DualPUMP Package (redundant dual
EnduroMAX option up to 100 hp)
• Variable Speed SRS (VS-SRS)
• Collision Sensing Terrain Follower
• OMAX Drill Head
• Rotary Axis
• A-Jet Articulated Cutting Head
• Water-only MAXJET 5 for cutting soft
materials
• OMAX Mini MAXJET 5i Nozzle
• Precision Optical Locator (POL)
• Manual Tilt Z-Axis
• Stone Cutting Kit
• Laminar Filter
• Waterjet Brick Kit
• Catcher Tank Armor Plating
• Material Holding Kit
• Laser Feature Finder
*Optional accessories may reduce travel. Images may show optional
accessories. For a complete list of accessories, contact an OMAX sales
representative. Pumps are built to meet UL and CE specications. Contact
OMAX for detailed utility requirements.