Safety Instructions

43
In the Remote Control software, open
the Manager Settings. Enter the IP
Address and Port number you set up
previously in your router. IP Address is
the WAN IP Address from the basic
setup page and the Port number is the
Port (or Public Port if separate) from
the port forwarding page.
Now you are ready to work with OM4001A over the internet.
7.5. OM4001A firmware upgrade
Download the firmware upgrade software and latest firmware file for the OM4001A from the official
OM Power website http://www.om-power.com/downloads. Store it to OM4001A folder created on
your PC.
NOTE: Use a serial null modem cable and connect the TCVR port on the OM4001A rear panel with a
COM port on the PC or use a LAN connection.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.