Safety Instructions

42
7.4.3 Remote Control without own IP Address, behind a router
If you need to change the OM4001A connection settings for some reason, use point 7.5.1 above.
Change router´s settings
Open up a WEB browser and enter the
routers´s internal IP Address ( usually
192.168.1.1)
An authentication window WILL APPEAR.
You need to enter the routers login and
password. Usualy a router´s default login is
“admin” or “administrator” and default
password “admin” or an empty field.
Open Firewall Settings (depends on router
software, can be called Forwarding, Port Forwarding, or something similar). As Server IP enter the
OM4001A IP Address, 192.168.1.222 if you haven't changed it, or the one you changed to in point 7.5.1.
Private port should be 10001 in default, or the one you changed to in point 7.5.1. Some routers don't have
separate Public Port settings. Enter an available port number (usually the default 10001 is free and usable).
Check the Enable box too. When done, click OK (or Save).
Open your Basic Router Setup (or WAN Settings or similar, depending on router) and note the WAN IP
Address value.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.