Safety Instructions

40
7.4. Remote Control using own public IP address:
7.4.1 Changing OM4001A connection settings
Connect the LAN connector on the
OM4001A to your local Internet with
ethernet cable.
Open up a WEB browser and enter the
OM4001A current IP address (default is
192.168.1.222).
An authentication window will show up. Leave the fields empty and click OK.
Open the Network menu and change the IP address, Subnet mask, Default Gateway and DNS Server
settings to the ones given by the internet provider. When done, click OK.
If necessary it is also possible to change the OM4001A local Port number. Make any changes as required
in the Connection menu. When finished, click OK.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.