Owner's Manual
Table Of Contents
- Introduction
- Please read the following items before use
- For safe use
- Batteries
- Setting the camera’s mode
- For Prevention of Water Leakage Accidents
- Handling the Product
- Contents
- 1. Preparations
- 2. Advance Check of the Case
- 3. Install the digital camera.
- 4. Taking Pictures Under Water
- 5. Handling After Shooting
- 6. Maintaining the Waterproof Function
- 7. Appendix
E-22
4. Taking Pictures Under Water
How to Use the Hand Strap
Pass your hand through the accessory hand strap and adjust the
length with the stop button.
Take pictures carefully.
Confirm the picture on the LCD monitor.
This Case uses the LCD monitor to confirm the picture. The
viewfinder cannot be used.
Quietly press the shutter lever.
When pressing the shutter lever, hold the Case securely with both
hands and operate the lever quietly to prevent camera shake.
Cautions when using the flash
When taking macro pictures on the wide-angle side, the flash light
may be missing in some parts or the light volume may not be uniform.
During underwater shooting, shooting conditions (water clarity,
suspended matter, etc.) can have a significant effect on the range
of the flash.
Always check your pictures on the LCD monitor after shooting.
(Pressing the Play back button engages the playback mode.
Pressing the button once more restores the shooting mode.)
Flash reaching range
(Land shooting)
W: Approx. 0.2 m to 3.4 m
T:Approx. 0.3 m to 2.0 m
PT024_E.qxd 2004.4.20 10:33 AM ページE-22