User manual

30 EN
Preparation
1
Turning the camera on
1
Set the ON/OFF lever to the ON position.
• When the camera is turned on, the monitor will turn on and display the super control
panel (P. 69).
The viewnder turns on when you put your eye to the viewnder. When the viewnder
is lit up, the monitor turns o󰀨.
See P. 37 for information on how to switch between the viewnder and the monitor.
• To turn the camera o󰀨, return the lever to the OFF position.
ON/OFF lever
Monitor
200200
ISO
Auto
ISO
Auto
WB Auto WB Auto
1
1
[
1
:
02
:
03
]
[
1
:
02
:
03
]
10231023
PP
100 % 100 %
0.00.0
00
+
-
1 /
250
1 /
F
250
5.65.6
F
Battery level
The camera displays the level of the battery
currently in use. The battery level is shown as
percentages.
100 % 100 %
Level of current battery (%)
The indicator ashes red
when the level reaches 10%.
Viewnder
%The Fn lever can be congured to turn the camera on and o󰀨 using the [Fn Lever/Power
Lever] option. g “Conguring [Fn Lever/Power Lever]” (P. 222)
Sleep Mode
If no controls are used for a set period, the camera will automatically enter suspend
operation to reduce the drain on the batteries. This is referred to as “sleep mode”.
• When the camera enters sleep mode, the monitor will turn o󰀨 and operation will be
suspended. Pressing the shutter or q button reactivates the camera.
• If no operations are performed for a set period after the camera enters sleep mode, the
camera will turn o󰀨 automatically. The camera can be reactivated by turning it on again.
# The camera may require additional time to recover from sleep mode when [On] (enabled)
is selected for [d Settings] > [Power-o󰀨 Standby]. g “Wireless Settings for When the
Camera Is O󰀨 (Power-o󰀨 Standby)” (P. 263))
# The delay before the camera goes to sleep or turns o󰀨 automatically can be selected in
the menu. g “Setting Sleep (Power Saving) Options (Sleep)” (P. 254), “Setting Auto
Power O󰀨 Options (Auto Power O󰀨)” (P. 254)