User manual
Table Of Contents
254
EN
Setting Up the Camera
7
Dimming the Backlight (Backlit LCD)
PASMB
n
Choose the length of time before the monitor backlight dims when no operations are
performed. Dimming the backlight reduces the drain on the battery.
Menu
MENU n e n 5. Battery/Sleep n Backlit LCD
8sec / 30sec / 1min The monitor backlight dims after the specied time.
Hold The monitor backlight does not dim.
Setting Sleep (Power Saving) Options (Sleep)
PASMB
n
Choose the delay before the camera enters sleep mode when no operations are
performed. In sleep mode, camera operations are suspended and the monitor turns o.
Menu
MENU n e n 5. Battery/Sleep n Sleep
O The camera does not enter sleep mode.
1min / 3min / 5min The camera enters sleep mode after the specied time.
• Normal operation can be restored by pressing the shutter button halfway.
# The camera will not enter sleep mode in the following situations.
while a multiple exposure is in progress, while connected to an HDMI device, while
connected to a smartphone via Wi-Fi, while connected to a computer via Wi-Fi or USB,
while connected to a remote control wirelessly, or while being powered via USB.
Setting Auto Power O Options (Auto Power O)
PASMB
n
The camera will turn o automatically if no operations are performed for a set time after
it has entered sleep mode. This option is used to choose the delay before the camera
turns o automatically.
Menu
MENU n e n 5. Battery/Sleep n Auto Power O
O The camera does not turn o automatically.
5min / 30min / 1h / 4h The camera turns o after the specied time.
%To reactivate the camera after it has turned o automatically, turn the camera on using the
ON/OFF lever.