User manual

251 EN
Setting Up the Camera
7
When Monitor is Opened
[Operative]: When [EVF Auto Switch] is [On] and you
put your eye to the viewnder, the display switches to
the viewnder even if the monitor is open.
[Inoperative]: When [EVF Auto Switch] is [On] and
you put your eye to the viewnder, the display does not
switch to the viewnder if the monitor is open.
%The [EVF Auto Switch] setting screen appears when you press and hold the u button.
Disabling the Focus Beep (8)
PASMB
n
Disable the beep that sounds when the camera focuses.
Menu
MENU n e n 3. Monitor/Sound/Connection n 8
On A beep sounds after successful autofocus operations. The beep sounds
only when the camera rst focuses using [C-AF].
O󰀨 A beep does not sound after successful autofocus operations.
%You may need to adjust settings in the [Silents Settings] menu in order to enable the
focus beep during silent shooting (P. 132).
External Monitor Display Options (HDMI Settings)
PASMB
n
Choose the signal output to external monitors connected via HDMI. Adjust the frame
rate, movie frame size, and other settings according to monitor specications.
Menu
MENU n e n 3. Monitor/Sound/Connection n HDMI Settings
Output Size
Choose the type of signal output to the HDMI
connector.
[C4K]: The signal is output in 4K digital cinema (4096
× 2160) format.
[4K]: If possible, the signal is output in 4K (3840 ×
2160).
[1080p]: If possible, the signal is output in Full HD
(1080p).
[720p]: If possible, the signal is output in HD (720p).
Output Frame Rate
Choose the signal frame rate according to whether the
device supports NTSC or PAL.
[60p Priority]: Frame rate for areas supporting NTSC.
[50p Priority]: Frame rate for areas supporting PAL.
# [Output Frame Rate] cannot be changed when the camera is connected to a device via
HDMI.
# Sound will not be played back unless the connected device is compatible with the sound
format.
%You can congure detailed options for when outputting signals to an HDMI device in
movie mode. g “HDMI Output (nHDMI Output)” (P. 182)