User manual

119 EN
Shooting Settings
4
 Attaching Compatible Flash Units
The methods used to attach and operate external ash units vary with the unit. See
the documentation provided with the unit for details. The instructions here apply to the
FL-LM3.
# Conrm that both the camera and ash unit are o󰀨. Attaching or removing a ash unit
while either the camera or ash unit is on could damage the equipment.
1
Remove the hot shoe cover and attach the ash.
• Slide the ash in until the foot clicks into place at the
back of the shoe.
Hot shoe cover
2
Position the ash head for bounce-ash
photography or direct lighting.
• The ash head can be rotated up and left or right.
• Note that ash output may be insu󰀩cient for correct
exposure when bounce ash lighting is used.
3
Rotate the ash ON/OFF lever to the ON position.
• Rotate the lever to the OFF position when the ash is
not in use.
ON/OFF lever