Digital Camera User's Manual
Table Of Contents
- Button operations
- Turning the camera on and off
- Shooting pictures/Recording movies
- Selecting shooting mode/Turning the camera on
- Selecting playback mode/Turning the camera on
- Switching shooting modes
- Changing the information on display/Display the menu guide
- Arrow pad
- OK/FUNC button
- Changing picture brightness (Exposure compensation)/ Printing pictures
- Shooting pictures close to the subject (Macro mode)
- Self-timer shooting
- Flash shooting
- Displaying the top menu
- Increasing the brightness of the monitor (Backlight boost)/ Erasing pictures
- Zooming while shooting/Close-up playback
- Menu operations
- About the menus
- Operation guide
- Using the menus
- Shooting mode menu
- Playback mode menu
- SETUP menus
- Formatting the internal memory or card
- Copying pictures in the internal memory to the card
- Selecting a display language
- Adjusting the image processing function
- Turning on the camera with the shooting or playback button
- Setting the menu screen color and background
- Setting the sound output from the camera
- Adjusting the monitor brightness
- Setting the date and time
- Playing back pictures on a TV
- Setting the camera to the power save mode
- Printing pictures
- Using OLYMPUS Master
- Getting to know your camera better
- Shooting tips and information
- Tips before you start taking pictures
- Shooting tips
- Additional shooting tips and information
- Increasing the number of pictures that can be taken
- Using a new card
- The card access lamp is blinking
- Extending the useful life of the battery
- Functions that cannot be selected from menus/Functions that cannot be selected even by pressing the function buttons
- To return the settings of functions to default settings
- Playback help and troubleshooting tips
- Playback tips
- Viewing pictures on a computer
- When you get an error message on the camera...
- Functions available in shooting modes and scenes
- Shooting tips and information
- Appendix
- Index
Using OLYMPUS Master
36
EN
Note
• Use a computer with a pre-installed operating system. Operations are not guaranteed on
home-built computers or computers with an updated operating system.
• Operations are not guaranteed when using an added USB or IEEE 1394 (FireWire) port.
• To install the software, you must log on as a user with administrators’ privileges.
• If you are using Macintosh, be sure to remove the media (drag & drop onto the trash icon)
before performing the following operations. Failure to do so could result in unstable computer
operation and the need to reboot.
• Disconnect the cable connecting the camera to the computer
• Turn off the camera
• Open the camera’s battery/card compartment cover
1 Make sure the camera is turned off.
• The monitor is off.
• The lens is retracted.
2 Connect the multi-connector on the camera to
the USB port on the computer using the provided
USB cable.
• Refer to your computer’s instruction manual to locate the
position of the USB port.
• The camera turns on automatically.
• The monitor turns on and the selection screen for the USB
connection is displayed.
3 Select [PC], and press .
Connecting the camera to a computer
For how to install the OLYMPUS Master software, refer to the installation guide
included in the CD-ROM.
Monitor
Multi-connector
Connector cover
EASY PRINT
USB
SET
OK
EXIT
CUSTOM PRINT
PC