Digital Camera User's Manual
Table Of Contents
- Button operations
- Turning the camera on and off
- Shooting pictures/Recording movies
- Selecting shooting mode/Turning the camera on
- Selecting playback mode/Turning the camera on
- Switching shooting modes
- Changing the information on display/Display the menu guide
- Arrow pad
- OK/FUNC button
- Changing picture brightness (Exposure compensation)/ Printing pictures
- Shooting pictures close to the subject (Macro mode)
- Self-timer shooting
- Flash shooting
- Displaying the top menu
- Increasing the brightness of the monitor (Backlight boost)/ Erasing pictures
- Zooming while shooting/Close-up playback
- Menu operations
- About the menus
- Operation guide
- Using the menus
- Shooting mode menu
- Playback mode menu
- SETUP menus
- Formatting the internal memory or card
- Copying pictures in the internal memory to the card
- Selecting a display language
- Adjusting the image processing function
- Turning on the camera with the shooting or playback button
- Setting the menu screen color and background
- Setting the sound output from the camera
- Adjusting the monitor brightness
- Setting the date and time
- Playing back pictures on a TV
- Setting the camera to the power save mode
- Printing pictures
- Using OLYMPUS Master
- Getting to know your camera better
- Shooting tips and information
- Tips before you start taking pictures
- Shooting tips
- Additional shooting tips and information
- Increasing the number of pictures that can be taken
- Using a new card
- The card access lamp is blinking
- Extending the useful life of the battery
- Functions that cannot be selected from menus/Functions that cannot be selected even by pressing the function buttons
- To return the settings of functions to default settings
- Playback help and troubleshooting tips
- Playback tips
- Viewing pictures on a computer
- When you get an error message on the camera...
- Functions available in shooting modes and scenes
- Shooting tips and information
- Appendix
- Index
Menu operations
28
EN
The pixel mapping feature allows the camera to check and adjust the CCD and image
processing functions. It is not necessary to operate this function frequently. Approximately
once a year is recommended. Wait at least one minute after taking or viewing pictures to
allow the pixel mapping function to perform properly. If you turn the camera off during pixel
mapping, start again.
Select [PIXEL MAPPING]. When [START] is displayed, press .
• Select [MY FAVORITE] and press Y to set a still picture registered in “My Favorite” as the
background.
g “SET Registering favorite pictures” (P. 24)
You can set the following with [SOUND SETTINGS].
• Setting the volume of the button operation sound. (BEEP)
• Selecting the volume of the shutter button. (SHUTTER SOUND)
• Adjusting the volume of the camera warning sound. (8)
• Adjusting the volume during playback. (q VOLUME)
• You can set all the sounds muted at once by setting [SILENT MODE].
g “SILENT MODE Muting operational sounds” (P. 23)
PIXEL MAPPING.................................................. Adjusting the image processing function
K/q......................................................... Turning on the camera with the K or q button
YES Pressing K turns on the camera and starts the camera in the shooting mode.
Pressing q turns on the camera and starts the camera in the playback mode.
NO The power is not turned on. To turn on the camera, press o.
MENU COLOR ......................................... Setting the menu screen color and background
NORMAL / COLOR1 / COLOR2 / COLOR3 / MY FAVORITE
SOUND SETTINGS ......................................... Setting the sound output from the camera
BEEP OFF (No sound) /
LOW / HIGH
SHUTTER SOUND OFF (No sound) /
LOW / HIGH
8 OFF (No sound) /
LOW / HIGH
q VOLUME OFF (No sound) /
1 / 2 / 3 / 4 / 5
s .......................................................................................... Adjusting the monitor brightness
BRIGHT/
NORMAL