Digital Camera Advanced Manual

126
Direct printing (PictBridge)
Printing
8
Connecting the camera to a printer
Use the provided USB cable to connect the camera to a PictBridge-compatible
printer.
1 Turn the printer on and plug the
printer end of the USB cable into
the printer's USB port.
• For details on how to turn the printer
on and the position of the USB port,
refer to the printer's manual.
2 Plug the USB cable into the
camera's multi-connector and
turn the camera on.
• The selection screen for the USB
connection is displayed.
3 Use p to select [<EASY] or
[<CUSTOM].
If you select
[<EASY]
• Go to “Easy printing” (P. 127).
If you select [<CUSTOM]
• [ONE MOMENT] is displayed and
the camera and printer are connected.
Go to “Flowchart for custom printing” (P. 127).
x Notes
• If the screen is not displayed after a few minutes, turn off the camera and start
again from Step 2.
Multi-connector
s0003_e_advanced.book Page 126 Wednesday, December 28, 2005 2:33 PM