User manual

Shooting
2
73 EN
Adjusting the degree of the art lter e󰀨ect (Fine-Tuning)
You can adjust the degree of the lter e󰀨ect for Pop Art, Soft Focus, Pin Hole, Cross
Process, and Instant Film before taking pictures.
1
Select [Pop Art I/II], [Soft Focus], [Pin Hole I/II/
III], [Cross Process I/II], or [Instant Film] on the
art-lter-selection screen (P. 70).
• The slider will appear on the display.
• Rotate the front dial to ne-tune the art lter.
• Touch controls can also be used.
• The e󰀨ect is visible in the display.
• To reset the lter e󰀨ect, press and hold the Q button.
Effect
Off
ART
1
ART
1
Pop Art
Slider
2
Press the Q button.
3
Shoot.
• Press the u button if you want to ne-tune the art lter again.
Using [Partial Color]
Record only selected hues in color.
1
Select [Partial Color I/II/III] in the art lter-
selection screen (P. 70).
• A color ring appears in the display.
Effect
Off
ART
14
ART
14
ColorColor
Partial Color
2
Rotate the front dial to select a color.
• The e󰀨ect is visible in the display.
• Touch controls can also be used.
3
Press the Q button.
4
Shoot.
• To choose a di󰀨erent color after shooting, press the u button.