User manual

Shooting
2
63 EN
[Multiple Exposure]: Shooting Multiple Exposures
Combine two di󰀨erent images on top of one another.
1
Highlight [Multiple Exposure] on the AP-mode-selection screen (P. 60) and
press the Q button.
2
Press the shutter button halfway down to focus.
• If the focus indicator blinks, the camera is not in focus.
3
Press the shutter button all the way down for the rst shot.
• a is displayed in green if shooting starts.
• The image is shown superimposed on the monitor.
• Press D to delete the last shot.
4
Take the second shot.
• Use the rst image as a guide to compose the second shot.
• The camera will not go to sleep while multiple exposure is in e󰀨ect.
• Performing any of the following actions automatically deletes the second shot:
The camera is turned o󰀨; the q button is pressed; the MENU button is pressed; the
u button is pressed; the mode dial is rotated; the battery power runs out; or any cable
is connected to the camera
%
• For more information on creating image overlays: g “Combining Pictures (Image
Overlay)” (P. 141)
$
• Advanced settings can be used when you select [Multiple Exposure] in the P/A/S/M
mode while the prole control switch is not in the COLOR/MONO position.
g “Recording multiple exposures in a single image (Multiple Exposure)” (P. 131)