User manual

Shooting
2
112 EN
Assigning functions to buttons (Button Function)
Other roles can be assigned to buttons in place of their existing functions.
 Customizable Controls
Button Default
t Function
AEL/AFL
R Function R REC
To change the function assigned to a button, follow the steps below.
1
Press the Q button to display the LV super control
panel.
2
Use FGHI to select [Button Function], and then
press the Q button.
• The custom menu [Button Function] item will be
displayed.
• [Button Function] can also be accessed from the menus
(P. 128, 145).
250250 F5.6
P
1023
1:02:03
sRGB
Natural
S - AF
F
S
Normal
WB
Auto
ISO
Auto
M-IS
S-IS On
A ± 0
± 0.0
±
0 ± 0
± 0
G ± 0
30p
4K
Button Function
Button Function
3
Use FG to highlight the desired button, and then press I.
4
Use FG to highlight the desired function, and then press the Q button.
5
Press the Q button again to exit.
$
• The functions assigned to the buttons may be unavailable in some modes.
• The options available vary with the current mode.
 Available Roles
t (AEL/AFL)
Press the button to use AE lock or AF lock. The function
changes according to the [AEL/AFL] (P. 151) setting.
When AEL is selected, press the button once to lock the
exposure and display u on the monitor. Press the button
again to cancel the lock.
R REC
Press the button to record a movie.
z (Preview)
Aperture is stopped down to the selected value while the
button is pressed.
k (One-touch white
balance)
Press the shutter button while the button is pressed to
acquire a white balance value (P. 95). Highlight the
desired number and press the Q button to save the value.
N (AF Area Select)
Press the button to choose the AF target (P. 81).
MF Press the button to select [MF] mode. Press the button
again to restore the previously selected AF mode. The
focus mode can also be selected by holding the button and
rotating a dial.