User manual

Shooting
2
107 EN
Adding a lm grain e󰀨ect to the Monochrome Prole
(Film Grain E󰀨ect)
An e󰀨ect similar to the grain seen in black-and-white lm can be added to the in
[MONO Prole 1/2/3/4] picture mode (P. 103) for later use.
• You can select these options while the prole control switch is in the COLOR/MONO
position.
1
Press the Q button to display the LV super
control panel.
2
Use FGHI to highlight picture mode, and
then press the Q button.
3
Use HI to select an option from [Mono1] to
[Mono4], and then press the Q button.
Picture Mode
Off
250250 F5.6
P
1023
1:02:03
N
T
S - AF
F
WB
Auto
ISO
Auto
M-IS
S-IS On
A ± 0
± 0.0
S
± 0 ± 0
sRGB
G ± 0
30p
4K
± 0
Film Grain Effect
Mono Profile 1
Film Grain E󰀨ect
4
Press the Q button again, use FGHI to highlight Film Grain E󰀨ect, and
then press the Q button.
5
Highlight an option using HI, and then press the Q button.
Film Grain E󰀨ect O󰀨
Film grain e󰀨ect not applied.
Film Grain E󰀨ect Low Add a ne-grain e󰀨ect to images.
Film Grain E󰀨ect Medium Add a grain e󰀨ect between “low” and “high” to images.
Film Grain E󰀨ect High Add a coarse-grain e󰀨ect to images.
• Film grain e󰀨ects can not be previewed in live view.