User manual

Shooting
2
103 EN
Adjusting ash output (Flash intensity control)
Flash output can be adjusted if you nd that your subject to appears overexposed, or is
underexposed even though the exposure in the rest of the frame is just right.
1
Press the Q button to display the LV super control
panel.
2
Use FGHI to select [x], and then press the
Q button.
3
Use HI to choose a value, and then press the Q
button.
250250 F5.6
P
1023
1:02:03
sRGB
Natural
S - AF
F
S
Normal
WB
Auto
ISO
Auto
M-IS
S-IS On
± 0
A ± 0
± 0.0
±
0 ± 0
± 0
G ± 0
30p
4K
Flash intensity control
• This setting has no e󰀨ect when the ash control mode for the external ash unit is set to
MANUAL.
• Changes to ash intensity made with the external ash unit are added to those made with
the camera.
Processing options (Picture Mode)
Choose how pictures are processed during shooting to enhance color, tone, and other
properties. Choose from preset picture modes according to your subject or artistic
intent. Contrast, sharpness, and other settings can be adjusted separately for each
mode. You can also add artistic e󰀨ects using art lters. Art lters give you the option
of added frame e󰀨ects and the like. Adjustments to individual parameters are stored
separately for each picture mode and art lter.
• This item applies during both still photography and movie recording.
1
Press the Q button to display the LV super
control panel.
2
Use FGHI to highlight picture mode, and
then press the Q button.
3
Highlight an option using HI, and then press
the Q button.
• The options available for the picture mode vary
depending on the shooting mode.
250250 F5.6
P
1023
1:02:03
sRGB
Natural
S - AF
F
30p
S
Normal
WB
Auto
ISO
Auto
M-IS
S-IS On
± 0
A ± 0
± 0.0
±
0 ± 0
± 0
G ± 0
4K
Picture Mode
Picture Mode