User manual

214

Cautions

Optional Accessories

Grip (ECG-5)

The grip helps you keep the camera steady when using large lenses.

Make sure to turn the camera off when attaching and removing the grip.

 Part na m e s

Shutter button

Front dial

Removal knob

Connector cap

 At t a ching the Grip

Before attaching the grip, remove the

connector cover (a) from the bottom of the

camera and the connector cap (b) from

the ECG-5. Once attached, make sure the

ECG-5 removal knob is tightly secured. Be

sure to replace the connector cover on the

camera when the ECG-5 is not in use.

Store the connector cover (a) in the ECG-5

 Main Speciﬁ c ations (ECG-5 )

Dimensions Approx. 128.4 mm (W) × 76 mm (H) × 60.2 mm (D)

(5.1" × 3.0" × 2.4")

Weight Approx. 121 g (4.3 oz.) (excluding battery and terminal cap)

Splash resistance

(when attached to camera)

Type Equivalent to IEC Standard publication 60529 IPX1

• Do not use your nail to turn the removal knob. Doing so could result in injury.

• Only use the camera within the guaranteed operating temperature range.

• Do not use or store the product in dusty or humid areas.

• Do not touch the electrical contacts.

• Use a dry, soft cloth to clean the terminals. Do not clean the product with a damp cloth,

thinner, benzine, or any other organic solvents.