User manual

K 2-5 The Viewfi nder and Monitor Displays
Choosing the Information Displayed
Press the INFO button.
• The information displayed changes each time the INFO button is pressed.
INFO
INFO
Info hidden
100 %
1
Basic info
ISO-A
200
1023
1:02:03
P
100 %
1
S-IS AUTOS-IS AUTO
250 F5.6
0.0
30
p
30
p
4K
YFYF
Level gauge
(Custom Display 2)
Histogram
(Custom Display 1)
INFOINFO
ISO-A
200
1023
1:02:03
P
100 %
1
S-IS AUTOS-IS AUTO
250 F5.6
0.0
ISO-A
200
1023
1:02:03
P
S-IS AUTOS-IS AUTO
100 %
1
250 F5.6
0.0
INFO button
• You can also hold the INFO button and rotate the front or rear dial to choose the information
displayed. The displays can be cycled in either direction.
%
• You can choose the items displayed in Custom Displays 1 and 2. You can also display data
from GPS and other sensors. Use G Custom Menu P > [G/Info Settings] (P. 515) >
[LV-Info] to choose items for display in live view, G Custom Menu a > [V Info Settings]
(P. 555) to choose items for display in the viewfi nder.
 Histograms
Histograms graph the distribution of brightness
in an image. The horizontal axis shows
brightness, the vertical axis the number of
pixels. During shooting, pixels brighter than the
upper limit are shown in red, pixels darker than
the lower limit in blue, and pixels in the spot metering area in green.
You can choose the upper and lower limits. g [Histogram Settings] (P. 526)
 Highlights and Shadows
Highlights and shadows, defi ned according to the upper and lower limits for the
histogram display, are shown in red and blue. You can choose the upper and lower
limits. g [Histogram Settings] (P. 526)
 The Level Gauge
The level gauge shows camera tilt. Pitch is shown by the vertical bar, roll by the
horizontal bar.
• The level gauge is intended as a guide only.
• Calibrate the gauge if you fi nd it is no longer truly plumb or level. g [Level Adjust]
(P. 559)
Many
Few
Dark Bright
84 EN
2