User manual

7-3 Warnings and Error Messages
Message/warning Cause Solution
m
The camera’s internal
temperature is elevated following
burst shooting or the like.
Turn the camera off and wait for
it to cool.
Internal camera temperature
is too high. Please wait for
cooling before camera use.
The camera is about to turn
off automatically. Wait until the
camera has cooled and is ready
to resume shooting.
Battery Empty
The batteries are exhausted. Charge the batteries.
No Connection
There is a problem with the
camera’s connection to a
computer or HDMI device.
Reconnect the camera.
The lens is locked.
Please extend the lens.
A retractable lens is attached but
not extended.
Extend the lens.
Please check the status of
a lens.
An error has occurred between
the camera and the lens.
Turn the camera off and
check that the lens is properly
connected before turning the
camera on again.
639 EN
7