User manual
Table Of Contents
- Product Manuals
- Table of Contents
- Feature Index
- Parts of the Camera
- Package Contents
- Before You Begin
- 1 Getting Ready
- 2 Taking and Viewing Photographs
- 3 Shooting and Viewing Movies
- 4 Customizing the Camera
- 5 Using Field Sensor Data
- 6 Connecting the Camera to External Devices
- 7 Technical Notes
- 8 SAFETY PRECAUTIONS
- 9 Index
6-5 Connecting to Computers via USB
Uploading Pictures as They Are Taken (0)
Connect the camera to a computer via USB to upload pictures as they area taken.
You can take pictures using the controls on the camera body or while controlling the
camera remotely from the computer.
1 After confi rming that the camera is off, connect it to the computer using the
USB cable.
• Use the supplied cable protector and cable clip to prevent damage to the connectors
when the USB cable is connected. g “Attaching Cable Protectors” (P. 29)
USB connector
Small connector
USB cableUSB port
• The locations of USB ports vary from computer to computer. See the documentation
provided with the computer for information on USB ports.
2 Turn the camera on.
• The camera will display a message prompting you to identify the device to which the
USB cable is connected.
• If the message is not displayed, select [Auto] for [USB Mode] (P. 529) in G Custom
Menu S.
• If the batteries are very low, the camera will not display a message when connecting to
a computer. Be sure the batteries are charged.
3 Highlight [0] using FG on the arrow pad and
press the OK button.
622
EN
6