User manual

6-3 Connecting to Computers via Wi-Fi
Ending the Connection
End the Wi-Fi connection. The use of Wi-Fi may be prohibited in some countries or
regions, in which case Wi-Fi should be disabled.
Ending the Current Connection
1 Tap V in the camera monitor.
ISO-A
200
1023
1:02:03
P
100 %
1
S-IS AUTOS-IS AUTO
250 F5.6
0.0
S-IS AUTOS-IS AUTO
30
p
30
p
4K
YFYF
• You will be prompted to confi rm whether you wish to
disconnect.
• The network SSID is shown in the display.
2 Highlight [Disconnect] using FG on the arrow
pad and press the OK button.
• The camera will terminate the connection and exit to
the shooting display.
• A confi rmation dialog will be displayed if data
remain to be uploaded. To terminate the connection,
highlight [Yes] and press the OK button.
3 To reconnect, tap V or select [T Wi-Fi
Connect] > [Access Point Connection] in the
q playback menu and press the OK button.
• The camera will automatically reconnect to
previously-selected networks.
• To connect to a new network, highlight [Maintain] in Step 2 and press the OK button. Choose
from a list of available networks and adjust settings as described in “Choosing a Network
from a List (Connect from Access Point List)” (P. 612).
• If you turn the camera off while upload is in progress, you will be prompted to choose
whether to power the camera down and terminate the Wi-Fi connection immediately or to
power the camera down only after upload is complete.
616 EN
6