User manual

4-5 Customizing Camera Functions
O Reducing Camera Blur (K Image Stabilizer)
Reduce blur caused by the camera shake that commonly occurs, for example, when
the subject is poorly lit or in photos taken at high zoom ratios.
• This item is for still photography. See page 176 for more information. The option selected
for [n AF/IS Settings] > [n Image Stabilizer] (P. 376) in the n video menu takes effect in
n (movie) mode.
S-IS Off
Image stabilization disabled. Select this option when using a
tripod.
S-IS AUTO (auto)
Image stabilization applies to motion on all axes. If panning
motion is detected, the camera will automatically suspend image
stabilization on that axis.
S-IS1 (multi-directional)
Image stabilization applies to all camera motion.
S-IS2 (vertical)
Image stabilization applies to motion at right angles to the camera
base. Use when panning the camera horizontally.
S-IS3 (horizontal)
Image stabilization applies to motion parallel to the camera base.
Choose when panning left or right with the camera in portrait (tall)
orientation.
• When using lenses other than Micro Four Thirds or Four Thirds system lenses, you will need
to specify the lens focal length. Press I on the arrow pad in the menu where you select an
option, then use the FGHI button to highlight a value and press the OK button. If the
lens information saved with [Lens Info Settings] (P. 550) is used, the saved focal length will
be applied.
• The setting selected with the lens image stabilization switch, if any, takes priority over that
selected with the camera.
%
• You can choose whether image stabilization will be performed while the shutter button is
pressed halfway. g G Custom Menu O > [Half Way Rls With IS] (P. 178)
O tab
[K Image Stabilizer] Choose an option
510 EN
4