User manual
Table Of Contents
- Product Manuals
- Table of Contents
- Feature Index
- Parts of the Camera
- Package Contents
- Before You Begin
- 1 Getting Ready
- 2 Taking and Viewing Photographs
- 3 Shooting and Viewing Movies
- 4 Customizing the Camera
- 5 Using Field Sensor Data
- 6 Connecting the Camera to External Devices
- 7 Technical Notes
- 8 SAFETY PRECAUTIONS
- 9 Index
4-3 Customizing Buttons and Dials
Role Function
AF Limiter
(AF Limit)
Enable the AF limiter (P. 143). Press once to enable [AF Limiter]. Press
again to disable. Hold the button and rotate the front or rear dial to
choose from three stored settings.
Preset MF (PreMF)
Toggle [K AF Mode] > [Preset MF] on or off (P. 129). Press the
control once to enable preset MF and again to restore the previous
focus mode. Alternatively, you can choose the [K AF Mode] by holding
the control and rotating a dial. Focus-mode selection using custom
controls is not available when [mode2] is chosen for [K Fn Lever
Function] (P. 475).
Lens Info Settings
(sLens)
Recall previously-saved lens data (P. 550). Recall saved data for the
current lens after changing lenses or the like.
IS Mode (IS)
Toggle [K Image Stabilizer] on or off (P. 176). Press once to select
[Off] and again to turn image stabilization on. Hold the control and rotate
the front or rear dial to access [K Image Stabilizer] options.
Flicker Scan
(P)
Adjust settings for [K Flicker Scan] (P. 193). Press the control to
select [On]. You can adjust shutter speed for best results while viewing
banding in the display. Press the control again to display shooting
information and access other settings. Press and hold the control to
select [Off] for [K Flicker Scan].
G Lock (touch
control lock)
Lock touch controls. Press and hold the button once to lock touch
controls and again to unlock. The I and G buttons must fi rst be
assigned a function using [Direct Function].
Electronic Zoom
(X)
Zoom power zoom lenses in or out. After pressing the control, use the
arrow pad to zoom in or out. Use For I on the arrow pad to zoom in
and G or H to zoom out. The I and G buttons must fi rst be assigned
a function using [Direct Function].
Flash Mode (#)
Adjust fl ash settings (P. 252). Press once to display fl ash options and
again select the highlighted option and exit. Highlight settings using the
front or rear dial or HI on the arrow pad. The I and G buttons must
fi rst be assigned a function using [Direct Function].
j/Y (sequential
shooting/self-timer)
Choose a drive (sequential shooting/self-timer) mode (P. 151). Press
once to display drive mode options and again select the highlighted
option and exit. Highlight settings using the front or rear dial or HI on
the arrow pad. The I and G buttons must fi rst be assigned a function
using [Direct Function].
467
EN
4