User manual

1-4 Turning the Camera On
1-4 Turning the Camera On
Rotate the ON/OFF lever to ON.
• The camera will turn on and the monitor will light.
• To turn the camera off, rotate the lever to OFF.
ON/OFF lever Monitor
The Battery Level Display
The level of the current battery and the
number of the bay in which it is inserted are
shown in the display. The battery level is
shown in 10 increments. The indicator fl ashes
red when the level reaches 10%.
ISO-A
200
1023
1:02:03
P
100 %
1
S-IS AUTOS-IS AUTO
250 F5.6
0.0
30
p
30
p
4K
YFYF
Current battery bay
Level of current battery
100 %
1
• The camera may require additional time to power on when [On] (enabled) is selected for
[Wi-Fi/Bluetooth Settings] > [Power-off Standby]. g “Connecting When the Camera Is Off
(Power-off Standby)” (P. 590)
Sleep Mode
If no controls are used for a set period, the camera will automatically enter suspend
operation to reduce the drain on the batteries. This is referred to as “sleep mode”.
• When the camera enters sleep mode, the monitor will turn off and operation will be
suspended. Pressing the shutter or q button reactivates the camera.
• If no operations are performed for a set period after the camera enters sleep mode, the
camera will turn off automatically. The camera can be reactivated by turning it on again.
• The camera may require additional time to recover from sleep mode when [On] (enabled)
is selected for [Wi-Fi/Bluetooth Settings] > [Power-off Standby]. g “Connecting When the
Camera Is Off (Power-off Standby)” (P. 590)
• The delay before the camera goes to sleep or turns off automatically can be selected in the
G custom menu. At default settings, the camera will go to sleep after one minute and turn off
automatically after four hours. g [Sleep] (P. 562), [Auto Power Off] (P. 562)
44 EN
1