User manual
Table Of Contents
- Product Manuals
 - Table of Contents
 - Feature Index
 - Parts of the Camera
 - Package Contents
 - Before You Begin
 - 1 Getting Ready
 - 2 Taking and Viewing Photographs
 - 3 Shooting and Viewing Movies
 - 4 Customizing the Camera
 - 5 Using Field Sensor Data
 - 6 Connecting the Camera to External Devices
 - 7 Technical Notes
 - 8 SAFETY PRECAUTIONS
 - 9 Index
 
n 3-11 Audio Recording
    Sound Recording Options   (Movie K)
Adjust settings for recording sound during fi lming. You can also access settings for 
use when an external microphone or recorder is connected.
Recording Volume
Adjust microphone sensitivity. Choose separate values for the built-in 
and external microphones.
[Built-In K]: 
Adjust the sensitivity of the built-in microphone.
[MIC K]: 
Adjust the sensitivity of external microphones connected to 
the microphone jack.
K Volume Limiter
Choose the maximum volume at which the camera will record sound. 
Use this option to automatically reduce the level of sounds above a 
certain volume.
Wind Noise 
Reduction
Reduce wind noise during audio recording.
Recording Rate
Choose an audio recording format.
[96kHz/24bit]: High-quality audio.
[48kHz/16bit]: Standard-quality audio.
K Plug-in Power
Adjust settings for use with condenser microphones and other devices 
that draw power from the camera.
[Off]: For devices that do not require power from the camera (general-
purpose dynamic microphones).
[On]: For devices that require power from the camera (condenser 
microphones).
 PCM Recorder K 
Link
Adjust settings for use with external IC recorders. Record a slate tone 
or choose whether camera controls can be used to start and stop 
recording when using an Olympus LS-100 IC recorder.
[Camera Rec. Volume]:  Choose [Operative] to record sound at the 
level selected with the camera, [Inoperative] 
to record sound at the level selected with the 
recorder.
[Slate Tone]:  Enable or disable slate tone recording.
[Synchronized R Rec.]: 
Choose whether audio recording begins and 
ends at the same time as movie recording.
Headphone Volume Adjust the volume of audio output to the headphones.
•  Sounds made by the lens or camera controls may be recorded during fi lming. For reduced 
noise, select [S-AF], [MF], or [PreMF] for [n AF Mode] (P. 345) and use camera controls 
as little as possible.
•  Sound is not recorded:
with high-speed or slow- or fast-motion movies or when k (diorama) is selected for 
picture mode.
•  O is displayed when [Off] is selected.
•  Audio can only be played on devices that support the option selected for [Recording Rate].
413
EN
3










