User manual
Table Of Contents
- Product Manuals
- Table of Contents
- Feature Index
- Parts of the Camera
- Package Contents
- Before You Begin
- 1 Getting Ready
- 2 Taking and Viewing Photographs
- 3 Shooting and Viewing Movies
- 4 Customizing the Camera
- 5 Using Field Sensor Data
- 6 Connecting the Camera to External Devices
- 7 Technical Notes
- 8 SAFETY PRECAUTIONS
- 9 Index
n 3-8 Metering and Exposure
Adjusting ISO Sensitivity (n ISO)
Adjust ISO sensitivity when [M] is selected for [n Mode] (movie exposure mode).
Higher values let you photograph darker scenes but also increase image “noise”
(mottling). Select [AUTO] to let the camera adjust sensitivity according to lighting
conditions. [AUTO] is the only option available when [P], [A], or [S] is selected for
[n Mode].
• ISO sensitivity can be adjusted while recording is in progress. Use the front or rear dial or
touch controls.
• Manual ISO sensitivity adjustment is available only when [M] is selected for [n Mode].
• This setting can be accessed via:
- The ISO button (P. 370)
- Touch controls (P. 371)
- The LV super control panel (P. 371)
- Live controls (P. 371)
AUTO
Sensitivity is adjusted automatically according to shooting conditions. The
camera adjusts sensitivity in the range ISO 200–6400. In [n Mode] (movie
exposure mode) [M] (manual), this option is available when [On] is selected for
[b ISO-Auto] (P. 372).
200–6400
(manual)
Choose a value for [n ISO]. ISO 200 offers a good balance between noise and
dynamic range. This option is available when [M] is selected for [n Mode].
• The range of sensitivities available when [AUTO] is selected varies with the options chosen
for [nK] and [Picture Mode].
• The following restrictions apply when [M] is selected for [n Mode]:
[Dramatic Tone] or [Watercolor] selected for art fi lter:
- The upper limit for [AUTO] is ISO 1600.
[l OM-Log400] selected for picture mode:
- If the frame rate selected for [nK] is 24p, 25p, or 30p, [AUTO] is restricted to
sensitivities of ISO 400–3200.
- If the frame rate selected for [nK] is 50p or 60p, [AUTO] is restricted to sensitivities of
ISO 400–6400.
- The lowest value that can be selected manually is ISO 200.
Other picture modes:
- If the frame rate selected for [nK] is 24p, 25p, or 30p, [AUTO] is restricted to
sensitivities of ISO 200–3200.
%
• You can choose the maximum and standard ISO sensitivity values available to auto ISO
sensitivity control when [AUTO] is selected and [M] is chosen for [n Mode]. g [b ISO-
Auto Set] (P. 372)
369
EN
3