User manual

Table Of Contents

Using External Power Sources

Connecting via USB

Batteries inserted in the camera will charge when the camera is connected to a

USB-AC adapter, computer, or other USB device via a USB cable. The batteries

charge only when the camera is off.

Devices that conform to the USB Power Delivery (USB PD) standard can also be

used to power the camera. g “6-6 Powering the Camera via USB (USB Power

Delivery)” (P. 625)

 Charging via USB

1 Conﬁ rm that the camera is off.

2 Connect the camera to the external device via USB.

• When attaching the USB cable, use the supplied cable

protector and cable clip to prevent damage to the

connectors. g “Attaching Cable Protectors” (P. 29)

• The CHARGE lamps light during charging. Charging

times vary with the output of the USB device. The lamps

each go out in turn as the batteries reach full charge.

• If only one battery is inserted, the camera will charge the

battery in whichever bay is occupied.

3 Charging ends when the camera is turned on.

• The batteries cannot be charged via USB when the camera is on.

• If a charging error occurs, the CHARGE lamps will blink. Disconnect and reconnect the USB

cable.

• USB charging is available when the battery temperature is between 0 and 40 °C.

• If connected to both an AC adapter and a USB device, the camera will receive power only

from the AC adapter.

• The supply of power ends when the batteries are charged. Disconnect and reconnect the

USB cable to resume charging.

• The batteries will not charge while the camera is off if pictures are being uploaded to a

smartphone via Wi-Fi (background auto upload). g “Connecting When the Camera Is Off

(Power-off Standby)” (P. 590)