User manual
Table Of Contents
- Product Manuals
- Table of Contents
- Feature Index
- Parts of the Camera
- Package Contents
- Before You Begin
- 1 Getting Ready
- 2 Taking and Viewing Photographs
- 3 Shooting and Viewing Movies
- 4 Customizing the Camera
- 5 Using Field Sensor Data
- 6 Connecting the Camera to External Devices
- 7 Technical Notes
- 8 SAFETY PRECAUTIONS
- 9 Index
K 2-10 Drive Mode (j/Y/i)
The Electronic Shutter (Silent s)
Take pictures using the electronic shutter. Use for shutter speeds faster than 1/8000 s
or in settings where the sound of the shutter would be unwelcome. The electronic
shutter can be used in single-frame mode and self-timer modes and for frame rates as
high as 60 fps in sequential shooting modes.
• The fl ash sync speed is 1/50 s.
• At [K ISO] settings over ISO 8000, the fl ash sync speed drops to 1/20 s and the maximum
frame advance rate to 30 fps.
Off
Disable silent mode. Silent modes will not be listed when you press the #jY
button or highlight the drive mode in the LV super control panel.
0 sec–30 sec
Choose how long the camera waits to take the picture after the shutter button
is pressed all the way down. Select [0 sec] for standard electronic front-curtain
shutter photography.
• At settings other than [Off], silent modes will be listed when you press the #jY button or
highlight drive mode in the LV super control panel or using live controls.
• To use the fl ash in [Silent s] mode, select [Allow] for [Silent s Mode Settings] > [Flash
Mode] (P. 167).
1 Press the MENU button to display the menus.
2 Highlight [Anti-Shock r/Silent s] in X Shooting
Menu 2 and press I on the arrow pad.
3 Highlight [Silent s] using the FG buttons and
press the I button.
4 Highlight a shutter-release delay ([0 sec]–[30 sec])
using the FG buttons and press the I button.
• [Silent s] options will be displayed.
163
EN
2