User manual

K 2-10 Drive Mode (j/Y/i)
Burst Shooting Options
(jL Settings/jH Settings)
Choose the maximum frame advance rates and shots per burst for sequential
shooting modes. Shooting ends if the maximum number of shots is reached while
the shutter button is pressed all the way down.
Choose the advance rate and number of shots per burst for
S (sequential low) and
T (sequential high) modes. For information on Pro Capture modes, see “Reducing
Shutter Lag (Pro Capture Photography)” (P. 168).
jL Settings
(sequential low
options)
Choose the frame rate and maximum number of shots per burst for
S (sequential low), S (anti-shock sequential low), and ♥S (silent
sequential low) modes. You can also adjust settings for q (Pro Capture
Low) mode (P. 168).
• S and S modes:
[Max fps]: 1–10 fps
[Frame Count Limiter]: 2–99, Off (no limit)
• ♥S mode:
[Max fps]: 1–18 fps
[Frame Count Limiter]: 2–99, Off (no limit)
jH Settings
(sequential high
options)
Choose the frame rate and maximum number of shots per burst for T
(sequential high) and ♥T (silent sequential high) modes. You can also
adjust settings for p (Pro Capture High) mode (P. 168).
• T mode:
[Max fps]: 10–15 fps
[Frame Count Limiter]: 2–99, Off (no limit)
• ♥T mode:
[Max fps]: 15, 20, 30, or 60 fps
[Frame Count Limiter]: 2–99, Off (no limit)
1 Press the MENU button to display the menus.
2 Display G Custom Menu N (Release/j/Image
Stabilizer).
3 Highlight [jL Settings] or [jH Settings] using
FG on the arrow pad and press the I button.
155 EN
2