User manual

Preparation

 Using the AC adapter (AC-5)

Open the AC terminal cover and connect the optional AC-5 AC

adapter to the AC terminal.

• The AC adapter cannot be used to charge the camera battery.

 Using the buttons

The roles performed by the arrow pad and B-Fn buttons on the HLD-9 can be

selected using the [Button Function] item. g “Assigning functions to buttons (Button

Function)” (P. 116)

 Main Speciﬁ cations (HLD-9)

Power Supply

Battery: BLH-1 Lithium-ion Battery × 1

AC power: AC-5 AC Adapter

Dimensions

Approx. 132.7 mm (W) × 55.8 mm (H) × 66.0 mm (D)

(5.2" × 2.2" × 2.6")

Weight Approx. 255 g (9.0 oz.) (excluding battery and terminal cap)

Splash resistance

(when attached to camera)

Type Equivalent to IEC Standard publication 60529 IPX1

• Use only the designated battery and AC adapter. Failure to do so could result in injury,

damage to the product, and ﬁ re.

• Do not use your nail to turn the removal knob. Doing so could result in injury.

• Only use the camera within the guaranteed operating temperature range.

• Do not use or store the product in dusty or humid areas.

• Do not touch the electrical contacts.

• Use a dry, soft cloth to clean the terminals. Do not clean the product with a damp cloth,

thinner, benzine, or any other organic solvents.

• Remove the batteries before putting the camera into storage for periods of a month or

more. Leaving the batteries in the camera for extended periods shortens their lives,

potentially rendering them unusable.