User manual

237

Menu functions (Custom menus)

Setting the card to record to (Card Slot Settings)

G Y [Card Slot Settings]

When there are cards in both slots 1 and 2, you can select which card to record still

images and movies to.

Highlight [Card Slot Settings] in G Custom Menu Y and press the Q button.

Use FG to select the item and press I.

• Use FG to select the setting and press the Q button.

K Save Settings

Choose the recording method for still images. g “Setting the

saving method for shooting data (K Save Settings)” (P. 99)

K Save Slot

Choose the card used to record photographs. This option takes

effect when [Standard] or [Auto Switch] is selected for [K Save

Settings].

n Save Slot

Choose the card used to record movies.

q Slot

Choose the card used for still image playback when [K Save

Settings] is set to [Dual Independent 1], [Dual Independent 3],

[Dual Same 1], or [Dual Same 3].

Assign Save Folder

Choose the destination folder.

• This option is also available when only one card is inserted.

• Settings other than [n Save Slot] and [Assign Save Folder] can only be accessed in still

photography modes.

• You can also choose a card for playback using the q button. Hold the q button and

rotate the front or rear dial to switch cards while playback is in progress. This does not

change the option selected for [q Slot].

• When [z] (Auto Switch) is selected for [K Save Settings], the camera will automatically

switch between the last picture on the ﬁ rst card and the ﬁ rst picture on the second card.

• In n (movie) mode, the slot selected for [n Save Slot] also serves as the [q Slot].