User manual

160
EN
Menu functions (Shooting menu)
4
5
Press the MENU button to exit the menus.
If you selected [On] for [Live ND Shooting], live ND lter photography will now start.
An icon appears in the display when the live ND lter is
enabled.
To end live ND lter photography, select [Off] in the [Live
ND Shooting] display shown in Step 2.
Live ND shooting
ISO-A
200
1023
1:02:03
S
S-IS AUTOS-IS AUTO
30 F5.6
0.0
S-IS AUTOS-IS AUTO
30
p
30
p
4K
YFYF
ND8
LVLV
100
%
6
Adjust shutter speed while previewing the results in
the display.
Adjust shutter speed using the rear dial.
The slowest shutter speed available varies with the ND
lter selected.
[ND2 (1EV)]: 1/30 s
[ND4 (2EV)]: 1/15 s
[ND8 (3EV)]: 1/8 s
[ND16 (4EV)]: 1/4 s
[ND32 (5EV)]: 1/2 s
ISO-A
200
1023
1:02:03
S
S-IS AUTOS-IS AUTO
30 F5.6
0.0
S-IS AUTOS-IS AUTO
30
p
30
p
4K
YFYF
ND8
LVLV
100
%
Shutter speed
If [On] is selected for [LV Simulation], the effects of changes to shutter speed can be
previewed in the display.
7
Take pictures.
The camera requires a length of time equivalent to the selected shutter speed to
produce [LV Simulation] results similar to the nal image.
The upper limit for [K ISO] during live ND photography is ISO 800. This also applies
when [AUTO] is selected for [K ISO].
Enabling the live ND lter sets the drive mode to o.
The following cannot be used:
HDR, High Res Shot, multiple exposure, keystone compensation, bracketing, interval-
timer photography, K icker scan, ickerless photography, and sheye correction.
Unlike physical ND lters, the live ND lter does not reduce the amount of light reaching
the image sensor, and consequently very bright subjects may be overexposed.
%
[Live ND Shooting] can be assigned to a button. You then need only press the button
to toggle [Live ND Shooting] [On] or [Off]. g “Assigning functions to buttons (Button
Function)” (P. 116)
To adjust live ND lter settings, hold the button to which [Live ND Shooting] is assigned
and rotate the front or rear dial.