DIGITAL CAMERA http://www.olympus.com/ Basic guide Goods delivery: Letters: Wendenstrasse 14 – 18, 20097 Hamburg, Germany Tel.: +49 40 - 23 77 3-0 / Fax: +49 40 - 23 07 61 Bredowstrasse 20, 22113 Hamburg, Germany Postfach 10 49 08, 20034 Hamburg, Germany European Technical Customer Support: Please visit our homepage http://www.olympus-europa.
4 Camera Hot shoe gP. 81, 84 Built-in flash gP. 78 LIGHT button gP. 14 Control panel gP. 6, 26 WB (White balance) button gP. 68 F (Exposure compensation) button gP. 47 ISO button gP. 50 Shutter button gP. 16, 34 External flash connector gP. 84 # (Flash) button gP. 77 w (Flash intensity control) button gP. 79 MODE button gP. 40 – 44 < / Y / j (Remote control / Self-timer / Sequential shooting) button gP. 59 – 61 AF button gP. 52 G (Metering) button gP. 46 COPY / < (Copy / Print) button gP.
Eyepiece shutter lever gP. 61 Diopter adjustment dial gP. 14 q (Playback) button gP. 18, 85 AEL / AFL button gP. 48, 98 0 (Protect) button gP. 93 Basic guide Eyecup gP. 131 Viewfinder gP. 5 LCD monitor gP. 8, 9, 31 Main dial (j) gP. 26 – 30 Arrow pad (acbd) gP. 29 i button gP. 29 < button gP. 99 P (AF target) button gP. 55 Card cover gP. 13 Illumination sensor gP. 107 INFO (Information display) button gP. 31, 88 MENU button gP. 29 Tripod socket u (Live view) button gP. 30 SSWF indicator gP.
Direct buttons You can set the following functions. Turn the dials while pressing the direct buttons. g“Using the direct buttons” (P. 26) Shooting mode MODE gP. 40 – 44 j White balance WB gP. 68 j/k Remote control / Self-timer / Sequential shooting < / Y / j gP. 59 – 61 k Flash mode # gP. 77 j WB compensation WB + F gP. 69 j/k WB bracketing WB + MODE gP. 71 j/k Exposure compensation F gP. 47 j/k Flash intensity control w gP. 79 k Sub dial k Reset F + ISO gP. 33 j/k ISO sensitivity ISO gP.
Viewfinder Aperture value gP. 40 – 43 Basic guide Spot metering area gP. 46 AF target gP. 55 Shooting mode gP. 40 – 45 Number of storable sequential pictures gP. 59 Shutter speed gP. 40 – 43 Super FP flash gP. 81 Image stabilizer gP. 63 ISO sensitivity gP. 50 Metering mode gP. 46 Auto bracket gP. 48, 51, 71, 80 ISO sensitivity value gP. 50 AE lock gP. 48 Flash intensity control gP. 79 AF confirmation mark gP. 16, 58 Battery check gP.
Control panel AF mode gP. 52 Exposure level indicator gP. 43 Exposure compensation indicator gP. 47 Auto bracket gP. 48, 51, 71, 80 Metering mode gP. 46 ISO sensitivity gP. 50 Shooting mode gP. 40 – 45 Record mode gP. 65 White balance gP. 67, 69 Picture mode (Monotone) gP. 72 Flash mode gP. 75 Shutter speed gP. 40 – 43 Sequential shooting gP. 59 Noise reduction gP. 74 Self-timer gP. 60 Aperture value gP. 40 – 43 Remote control gP. 61 6 EN Battery check gP. 14 Image stabilizer gP.
Super control panel Shutter speed gP. 40 – 43 My Mode gP. 44 Exposure compensation indicator gP. 47 Exposure level indicator gP. 43 Flash intensity control indicator gP. 79 Flash charging gP. 78 Basic guide The following screen allows the display and setting of shooting settings at the same time and is called the super control panel. Press the INFO button to display the super control panel on the LCD monitor. g“Using the super control panel” (P. 28) RC mode m gP. 82 Super FP flash 1 gP.
LCD monitor (Live view) You can use the LCD monitor to view the subject while shooting. Press the u button to use live view. g“Using live view” (P. 30) Metering mode gP. 46 Aperture value gP. 40 – 43 Flash mode gP. 75 Image stabilizer gP. 63 Shutter speed gP. 40 – 43 Home position p gP. 57 RC mode q gP. 82 Flash intensity control r gP. 80 Super FP flash s gP. 81 Auto bracket t gP. 48, 51, 71, 80 AE lock u gP. 48 Flash gP.
LCD monitor (Playback) Record mode gP. 65 Focal distance gP. 134 (The focal distance is displayed in 1 mm units.) Battery check gP. 14 Shooting mode gP. 40 – 44 Card gP. 132 Aperture value gP. 40 – 43 Print reservation Number of prints gP. 109 Protect gP. 93 LN Shutter speed gP. 40 – 43 Exposure compensation gP. 47 x10 [3648x2736,1/8] 1/250 F5.6 +2.0 45mm ISO 100 0.0 WB : AUTO A : 0 G: 0 NATURAL sRGB 15 Single-frame playback information Frame number gP.
Unpack the box contents The following items are included with the camera. If anything is missing or damaged, contact the dealer from whom you purchased the camera. Camera Body cap Strap BCM-2 Lithium ion charger USB cable OLYMPUS Master 2 CD-ROM Instruction manual BLM-1 Lithium ion battery Video cable Warranty card Attaching the strap 1 2 Thread the strap as indicated by the arrows (1, 2). 10 EN 3 Lastly, pull the strap tight making sure that it is fastened securely (3).
Preparing the battery Remove the protection cap from the battery. Charging the battery Charging indicator Red light: Charging in progress Green light: Charging completed (Charging time: Approx. 5 hours) BLM-1 Lithium ion battery W Basic guide 1 BCM-2 Lithium ion charger AC cable Align the battery with the arrow.
Attaching a lens to the camera 1 Body cap Remove the body cap from the camera and the rear cap from the lens Rear cap 1 2 1 2 2 Attach a lens to the camera • Align the lens attachment mark (red) on the camera with the alignment mark (red) on the lens, then insert the lens into the camera’s body (1). • Rotate the lens in the direction indicated by the arrow until you hear it click (2). Lens attachment mark (Red) Alignment mark (Red) 2 1 Do not press the lens release button.
Loading the card xD-Picture Card Slide the card cover lock (1) and open the card cover. Insert the card’s contact area into the slot as far as it can go (2). Slide the card cover lock (1) and open the card cover. Insert the card until it is locked into place (2). Basic guide CompactFlash / Microdrive Card cover 2 2 1 1 CF card slot xD-Picture Card slot W mark CompactFlash / Microdrive xD-Picture Card • Press the eject button all the way in to eject the card. • Pull out the card.
Power on 1 Set the camera’s power switch to ON • To turn off the power, set the power switch to OFF. Control panel LIGHT button When the camera is turned on, the battery check is displayed on the control panel. Turns the control panel light on and off. Lit up (ready for use) Blinks (charging required) Power switch SSWF indicator Dust reduction function operation The dust reduction function is automatically activated when the camera is turned on.
Setting the date / time Basic guide Date and time information is recorded on the card together with the images. The file name is also included with the date and time information. Be sure to set the correct date and time before using the camera. 1 Press the MENU button Arrow pad acbd • The menu screen is displayed on the LCD monitor. CARD SETUP CUSTOM RESET PICTURE MODE GRADATION WB CANCEL SELECT 2 MENU button NORM N AUTO ’--.--.---:-- CANCEL SELECT 3 CF AUTO ENG.
Shooting Shutter button Viewfinder 1 Place the AF target on the subject while viewing through the viewfinder 2 Adjust the focus Card access lamp Press the shutter button halfway. Viewfinder AF target Control panel Aperture value AF confirmation mark Shutter speed • The focus is locked when a beep tone is output. The AF confirmation mark and the AF target in focus light up in the viewfinder. • The shutter speed and aperture value that have been set automatically by the camera are displayed.
Basic guide Holding the camera Keep your fingers and the strap away from the lens, flash, and the white balance sensor. Horizontal grip It is possible to use the LCD monitor as a viewfinder and check the subject’s composition, or shoot while viewing an enlarged display on the LCD monitor. g“Using live view” (P. 30) Taking a picture while viewing the monitor 1 Vertical grip Shutter button Press the u (live view) button • The subject is displayed on the LCD monitor.
Playback / Erasing Playing back images Pressing the q button displays the last picture taken. q button Displays the frame that is stored 10 frames back Displays the previous frame Displays the next frame Arrow pad Displays the frame that is stored 10 frames ahead Each time you turn the main dial towards U, the image is incrementally enlarged from 2x to 14x. Close-up playback Main dial Erasing images Play back the image you want to erase and press the S button.
Indications used in this manual x Notes Important information on factors which may lead to a malfunction or operational problems. Also warns of operations that should be absolutely avoided. TIPS Useful information and hints that will help you get the most out of your camera. g Basic guide In this manual, j indicates the main dial on the back of the camera. In this manual, k indicates the sub dial on the front of the camera.
Table of Contents Basic guide 2 Identifies the camera part names and describes the basic steps for shooting and playback. Names of parts and functions .....................................................................................................2 Camera .....................................................................................................................2 Direct buttons............................................................................................................
3 Exposure 40 Describes functions related to exposure, which is important for shooting. These functions are for determining the aperture value, shutter speed, and other settings by measuring the brightness in the picture. Program shooting .....................................................................................................................40 Aperture priority shooting..........................................................................................................
5 Record mode, white balance, and picture mode 65 Describes image adjustment functions specific to digital cameras. Selecting the record mode ........................................................................................................65 Recording formats...................................................................................................65 Selecting the record mode ......................................................................................
8 Customizing your camera 96 Describes how to customize the camera’s settings. Custom Menu 1 ........................................................................................................................96 a AF / MF ................................................................................................................................96 AF ILLUMINAT. .......................................................................................................96 FOCUS RING .....................
PRIORITY SET .....................................................................................................106 dpi SETTING.........................................................................................................106 i K UTILITY .......................................................................................................................107 EXT. WB DETECT ................................................................................................107 Custom Menu 2 ..........
11 Shooting tips and maintenance 121 Refer to this section for troubleshooting and camera maintenance information. Shooting tips and information .................................................................................................121 Tips before you start taking pictures .....................................................................121 Shooting tips .........................................................................................................
1 Basic camera operations There are three basic ways to make function settings with this camera. 1 Using the direct buttons to operate the camera P. 26 You can make the function settings by rotating the main dial or sub dial while pressing the direct buttons assigned to a function. This is useful for operating the camera while composing the subject in the viewfinder and for quickly operating the camera while checking the settings on the control panel.
• The three buttons next to the flash have two functions each. Use the main dial to operate and set the functions indicated above the buttons, and use the sub dial to operate and set the functions indicated to the side of the buttons. 1 Basic camera operations After pressing two direct buttons at the same time, turn the main dial or sub dial. • When the buttons are pressed, the corresponding function is selected. The function remains selected for approximately 8 seconds.
Using the super control panel Select an item on the super control panel and change the setting. 1 Press the INFO button to display the super control panel on the LCD monitor. Sub dial • Press the INFO button again to turn off the super control panel. • Press the i button during live view to display the super control panel. 1 Basic camera operations 2007. 12.16 Main dial NR AF INFO button i button p Arrow pad arge Normal 2 Press the i button. • The cursor on the super control panel lights.
Using the menu 1 Press the MENU button. • The menu is displayed on the LCD monitor. CARD SETUP CUSTOM RESET PICTURE MODE GRADATION CANCEL SELECT i button GO MENU button p Arrow pad Operation guide is displayed at the bottom of the screen. CANCEL MENU : Press the MENU button to cancel the setting. : Press dac on the arrow pad to move the cursor and select an item. SELECT The symbols displayed on the LCD monitor correspond to the arrow pad shown below.
Using the dials to select a menu • In addition to using the arrow pad, you can also use the dials to select a function. Turn the main dial to move the cursor vertically (the same as pressing ac), and turn the sub dial to move the cursor horizontally (the same as pressing bd).
Focusing during live view 250 F5.6 • When you press the shutter button all the way during live view, the focus is locked and a picture is taken. The image display on the monitor freezes as the mirror goes down during focusing. • To focus in advance, hold down the AEL / AFL button and press the shutter button. When the focus is locked, the AF confirmation mark lights up. When the AF confirmation mark is blinking, the focus is not locked.
Enlarged display operation It is possible to enlarge the subject for display. Enlarging the image during MF makes focus confirmation and adjustment easier. 250 F5.6 1 38 Basic camera operations 1 Use p to move the frame and press the i button. 2 Turn the main dial (or sub dial) to change the magnification (5x / 7x / 10x). • Area inside the frame is enlarged and displayed. • Press and hold the i button to return the shifted enlargement frame to the center.
Using reset settings You can reset the camera to [RESET1] or [RESET2] setting or restore the factory default settings. [RESET] : Resets to the factory default settings. For the default settings, see “Menu directory” (gP. 143). [RESET1] / [RESET2] : Resets to the registered settings. Direct button F + ISO Viewfinder : RESET : RESET1 : RESET2 1 Basic camera operations • Holding down the F button and ISO button at the same time for 2 seconds performs [RESET].
2 Shooting guides – Improving your shooting skills Basic function guides To familiarize yourself with the camera, you can start off by taking pictures of surrounding subjects, such as children, flowers and pets. If the pictures taken are not to your liking, try adjusting some of the settings below. You can take more satisfying pictures simply by familiarizing yourself with these basic camera functions.
Brightness – Exposure compensation The camera automatically determines the aperture value and shutter speed according to the brightness level. This is called auto exposure. However, you may not be able to capture the intended picture with auto exposure alone. In this case, you can increase or decrease the auto exposure setting. Increase the exposure to enhance the brightness of a summer beach or the whiteness of snow.
Convenient settings – Customizing functions This camera is equipped with various shooting functions that can be customized for ease of use. For example, if you want to take several pictures of the same subject using the same settings, you can register those settings as My Mode for use at a later time. You can then easily load that registered My Mode and use it as the shooting mode.
Changing metering mode Depending on the depth of the water and the direction of the sun, the brightness of the water can differ significantly in different areas of the same composition. There is also a difference in the brightness of forests depending on the way the trees overlap each other. If you know which areas you want to emphasize the compensation in the image composition, you can change the metering mode.
Using exposure compensation When shooting flowers against a background, select as simple a background as possible to bring out the shape and color of the flower. When shooting bright and whitish flowers, adjust the exposure compensation to – (minus) so that the flower stands out from the darker background.
Taking night scene pictures There are different types of night scenes, from the afterglow of a sunset and city lights at night to special light displays and firework displays. Using a tripod Because a slow shutter speed is needed to capture night scenes, a tripod is required to prevent camera shake. If a tripod is not available, you should place the camera on a stable surface to prevent camera shake. Even if the camera is secured, camera shake may occur when pressing the shutter button.
3 Exposure Program shooting The camera sets the optimum aperture value and shutter speed automatically according to the subject brightness. Direct button MODE button MODE + j [P] j • When the shutter button is half-pressed, the shutter speed and aperture value are displayed on the viewfinder and control panel.
Aperture priority shooting The camera sets the optimum shutter speed automatically for the aperture value you have selected. When you open the aperture (decrease the aperture value), the camera will focus within a shorter range (shallow depth of field) and produce a picture with a blurred background. When you close the aperture (increase the aperture value), the camera will focus within a longer range. Use this mode when you wish to add changes to the background representation.
Shutter priority shooting The camera sets the optimum aperture value automatically for the shutter speed you have selected. Set the shutter speed depending on the type of effect you want. A higher shutter speed allows you to capture a fast-moving subject without blur, and a slower shutter speed blurs a moving subject, creating a feeling of speed or motion. A fast shutter speed can freeze a fast action scene without any blur. 3 Direct button A slow shutter speed will blur a fast action scene.
Manual shooting Allows you to set the aperture and shutter speed manually. You can check how much it differs from the appropriate exposure by using the exposure level indicator. This mode gives you more creative control, allowing you to make whatever settings you like, regardless of the correct exposure. Direct button MODE + j [M] To set the aperture value: Turn the main dial. To set the shutter speed: Turn the sub dial. 3 Exposure • The range of aperture values available varies with the lens type.
Bulb shooting You can take a picture with a bulb exposure time in which the shutter stays open as long as you hold down the shutter button. Bulb shooting can also be done using an optional remote control (RM-1) or remote control cable (RM-CB1). g“Bulb shooting with the remote control” (P. 63) Direct button MODE + j [B] • “buLb” is displayed in the viewfinder and on the control panel.
Under water wide / macro shooting This camera has optimal shooting settings for underwater shooting. I (under water wide) is suitable for shooting underwater landscapes, and H (under water macro) is suitable for shooting up close underwater. To shoot using under water wide or under water macro, you must set [; FUNCTION] to [I / H]. g“; FUNCTION” (P.
Changing the metering mode There are 5 ways to measure the subject brightness: Digital ESP metering, Center weighted averaging metering, and three types of spot metering. Select the most suitable mode for the shooting conditions.
Exposure compensation In some situations, you may get better results if you manually compensate (adjust) the exposure value set automatically by the camera. In many cases, bright subjects (such as snow) will turn out darker than their natural colors. Adjusting toward + makes these subjects closer to their real shades. For the same reason, adjust toward – when shooting dark subjects. The exposure can be adjusted in a range of ±5.0 EV. ±0 –2.0 EV Direct button +2.
AE lock The metered exposure value can be locked with the AEL / AFL button (AE lock). Use AE lock when you want a different exposure setting from the one that would normally apply under the current shooting conditions. Normally, pressing the shutter button halfway locks both AF (auto focus) and AE (automatic exposure), but you can lock the exposure alone by pressing the AEL / AFL button. Press the AEL / AFL button at the position where you wish to lock the metering values and the exposure will be locked.
Compensation value: 0.3, 0.7 or 1.0 • The compensation value will change if the EV step is changed. g“EV STEP” (P. 103) Number of frames: 3 or 5 Direct button MODE + AF j / k Menu MENU [X] [AE BKT] Setting display Viewfinder Number of frames EV step Control panel Number of frames EV step Bracketing Exposure Compensation range • The exposure value for the next shot is displayed during shooting. 3 Start shooting.
E-3_MASTER.fm Seite 50 Freitag, 19. Oktober 2007 2:12 14 ISO sensitivity setting The higher the ISO value, the greater the camera’s light sensitivity and the better its ability to shoot in low light conditions. However, higher values may give pictures a grainy appearance. Direct button ISO + j / k Super control panel i p: [ISO] Menu MENU [W] [ISO] j ISO button k [AUTO] 3 Exposure : The sensitivity is set automatically according to the shooting conditions.
Display after setting Viewfinder Control panel When set to AUTO, ISO-A and the ISO value determined by the camera are displayed. For all other settings, ISO and the set value are displayed. When set to 2000 or a higher value, ISO blinks. When set to a setting other than AUTO, ISO is displayed. When set to 2000 or a higher value, ISO blinks. ISO bracketing 3 Exposure The camera automatically takes pictures at a different ISO sensitivity with the shutter speed and aperture value fixed.
4 Focusing and shooting functions AF mode selection The three focus modes S-AF, C-AF, and MF are available with this camera. You can take pictures by combining S-AF or C-AF mode with MF mode.
S-AF (single AF) Focusing is performed once when the shutter button is pressed halfway. If focusing fails, release your finger from the shutter button and press it halfway again. This mode is suitable for taking pictures of still subjects or subjects with limited movement. Press the shutter button halfway. Viewfinder • When the focus is locked, the AF confirmation mark lights up. • A beep sound is output when the subject is in focus.
MF (manual focus) This function allows you to manually focus on any subject while looking through the viewfinder. Adjust the focus using the focus ring. TIPS To change the rotational direction of the focus ring: j You can select the rotational direction of the focus ring to suit your preference for how the lens adjusts to the focusing point. g“FOCUS RING” (P.
AF target selection This camera has 11 AF targets for focusing on the subject with auto focus. Select the optimal AF target mode according to your subject and the composition. There are two AF target modes: All target AF mode, which uses AF at all AF targets, and Single target AF mode, which uses AF centering around one selected AF target. B All target AF mode The camera automatically focuses on the subject in front of the camera from among the 11 AF targets.
Direct button P button P+k k • When the button is released, the currently selected AF target lights. When M or N is set, you can select the AF target to be used at that point. For operation, refer to Step 2 in “Selecting the AF target position” (gP. 56) in the next section. Super control panel i p: [AF AREA] P +k • When M or N is set, you can turn the dial to select the AF target. Menu MENU [X] [AF AREA] MENU button i button • When M or N is set, you can select the AF target with p.
Registering an AF target mode You can register a frequently used AF target mode and the position of that AF target. You can then quickly load that registered setting (“home position”) and use it when shooting. Registering 1 In the screen of Step 2 of “Selecting the AF target position” (gP. 56), press the < button and F button at the same time. • The home position is registered at the time the buttons are pressed. • The home position cannot be registered when operated from a menu.
Focus lock – If correct focus cannot be obtained The camera’s auto focus may not be able to focus on the subject in situations such as when the subject is not in the center of the frame. If this happens, the easiest solution is to use focus lock. Use this when composing the subject outside of the 11 AF targets or when the subject is difficult to focus on. 1 Adjust the AF target with the subject to be focused and press the shutter button halfway until the AF confirmation mark lights up.
If the subject has lower contrast than its surroundings If the contrast of the subject is weak, such as when the lighting is insufficient or the subject cannot be seen clearly because of fog, the focus may not be achieved. Focus (focus lock) on a high-contrast object the same distance away as the intended subject, recompose your shot and then take the picture. Sequential shooting Single-frame shooting o Shoots 1 frame at a time when the shutter button is pressed (normal shooting mode).
Setting display Viewfinder Control panel Single-frame shooting Sequential shooting H : Sequential shooting L : 12-second self-timer : 2-second self-timer : Remote control : 2-second remote control : 4 • Anti-shock display: A blinking display in the viewfinder or on the control panel and the D symbol on the super control panel indicates that anti-shock is activated. Focusing and shooting functions Self-timer shooting This function lets you take pictures using the self-timer.
Eyepiece shutter When shooting without looking through the viewfinder, close the eyepiece shutter to block the viewfinder so that light does not enter the viewfinder and change the exposure. Lift the eyepiece shutter lever. Eyepiece shutter lever Remote control shooting By using the optional remote control (RM-1), you can take a picture with yourself in it or a night scene without touching the camera.
Transmitted signal effective area Point the remote control at the remote control receiver of the camera within the effective area as shown below. When powerful lighting such as direct sunlight is shining on the remote control receiver, or when fluorescent light or devices emitting electrical or radio waves are nearby, it could narrow the effective area. Approx. 3m (9.8 ft.) (indo Approx. or) 2m (6.6 ft.) (outdo or) Remote control Approx. 5m (16.4 ft.) (indoor) Approx. 3m (9.8 ft.) (outdoor) or) ft.
Bulb shooting with the remote control Set the shooting mode to [A]. g“Bulb shooting” (P. 44) Press the W button on the remote control to open the shutter. When the time set in “BULB TIMER” (gP. 103) elapses, the shutter closes automatically. Press the T button to close the shutter. Anti-shock You can select the interval from the time the mirror is raised until the shutter is released. This diminishes camera shake caused by vibrations when the mirror moves.
E-3_MASTER.fm Seite 64 Freitag, 19. Oktober 2007 2:17 14 Setting display : OFF : I.S. 1 Viewfinder : I.S. 2 Control panel Checking the image stabilizer effect with live view 4 Focusing and shooting functions 64 EN You can hold down the o button during live view to see the effect of the image stabilizer on the monitor. While in that position, you can press the shutter button fully to take a picture.
Record mode, white balance, and picture mode Selecting the record mode You can select a record mode in which to take pictures. Choose the record mode that is best for your purpose (printing, editing on a PC, website editing, etc.). Recording formats JPEG For JPEG images, select a combination of image size (Y, X, W) and compression rate (SF, F, N, B). An image consists of pixels (dots). When you enlarge an image with a low pixel count, it will be displayed as a mosaic.
RAW This is unprocessed data that has not undergone changes in white balance, sharpness, contrast or color. To display as an image on the computer, use OLYMPUS Master. RAW data cannot be displayed on a different camera or by using common software, and it cannot be selected for print reservation. It is possible to edit images taken with the record mode set to RAW data using this camera. g“Editing still images” (P.
Selecting the white balance Color reproduction differs depending on the light conditions. For instance, when daylight or tungsten lighting is reflected on white paper, the shade of white produced will be slightly different for each. With a digital camera, white color can be adjusted to reproduce more natural white with a digital processor. This is called white balance. There are 4 options for setting the WB with this camera.
Setting the auto / preset / custom white balance You can adjust the white balance by selecting the appropriate color temperature for the light conditions. F button Direct button WB + j / k Super control panel i p: [WB] WB button k • Custom white balance is set by selecting [CWB] and turning the dial while pressing down the F button.
WB compensation This function lets you make fine changes to the auto WB and preset WB settings. WB + F k: adjust in A direction / Direct button j: adjust in G direction • Use the sub dial to set in the A direction or the main dial to set in the G direction. Super control panel i p: [>] Menu MENU [W] [WB] • Select the white balance to adjust and press d.
Setting the one-touch white balance This function is useful when you need a more precise white balance than preset WB can provide. Point the camera at a sheet of white paper under the light source you want to use to determine the white balance. The optimum white balance for the current shooting conditions can be saved for up to 4 settings in the camera. This is useful when shooting a subject under natural light, as well as under various light sources with different color temperatures.
WB bracketing Three images with different white balances (adjusted in specified color directions) are automatically created from one shot. One image has the specified white balance, while the others are the same image adjusted in different color directions. Direct button WB + MODE k: EV step in A-B direction / j: EV step in G-M direction • Use the sub dial to set in the A-B direction or the main dial to set in the G-M direction.
Picture mode You can select image tone to create unique image effects. You can also fine-adjust image parameters such as contrast and sharpness for each mode. The adjusted parameters are recorded in each picture effect mode. [hVIVID] : Produces vivid colors. [iNATURAL] : Produces natural colors. [jMUTED] : Produces flat tones. [ZPORTRAIT]: Produces beautiful skin tones. [MONOTONE] : Produces black and white tone. [CUSTOM] : Select one picture mode, set the parameters, and register the setting.
Gradation In addition to the [NORMAL] gradation setting, you can select from 3 other gradation settings. [HIGH KEY] : Gradation for a bright subject. [LOW KEY] : Gradation for a dark subject. [AUTO] : Divides the image into detailed regions and adjusts the brightness separately for each region. This is effective for images with areas of large contrast in which the whites appear too bright or the blacks appear too dark. [NORMAL] : Use [NORMAL] mode for general uses.
Noise reduction This function reduces the noise that is generated during long exposures. When shooting night scenes, shutter speeds are slower and noise tends to appear in images. When the shutter speed is slow, noise reduction is activated and the camera automatically reduces noise to produce clearer images. However, shooting time is approximately twice as long as usual. OFF Menu 5 Record mode, white balance, and picture mode 74 EN ON MENU [W] [NOISE REDUCT.
6 Flash shooting Flash mode setting The camera sets the flash mode according to various factors such as firing pattern and flash timing. Available flash modes depend on the exposure mode. The flash modes are available to optional external flashes. Auto flash AUTO The flash fires automatically in low light or backlight conditions. To shoot a subject with backlighting, position the AF target over the subject. Flash synchronization speed / Slow limit Shutter speed can be changed when the built-in flash fires.
Slow synchronization (2nd curtain) #SLOW2 / 2nd CURTAIN 2nd curtain flash fires just before the shutter closes. Changing the flash timing can create interesting effects in your picture, such as expressing the movement of a car by showing the tail-lights streaming backwards. The slower the shutter speed, the better the effects turn out. In S / M / A mode, the flash always fires. When the shutter speed is set to 2 sec.
Manual flash This allows the built-in flash to output a fixed amount of light. To shoot with manual flash, set the f-number on the lens based on the distance to the subject. Ratio of amount of light GN: Guide number (Equivalent to ISO 100) FULL (1/1) 13 1/4 6.5 1/16 3.3 1/64 1.6 Calculate the f-number on the lens using the following formula. Aperture (f-number) = GN x ISO sensitivity Distance to the subject (m) ISO sensitivity ISO value 100 200 400 800 1600 3200 ISO sensitivity 1.0 1.
Built-in flash shooting 1 Press the #UP button to raise the built-in flash. 2 Press the shutter button halfway. 3 Press the shutter button all the way. • The # (flash stand-by) mark lights when the flash is ready to fire. If the mark is blinking, the flash is charging. Wait until charging is complete. #UP button Flash stand-by mark Viewfinder TIPS To shoot without having to wait for the flash to finish charging: j See “RLS PRIORITY S / RLS PRIORITY C” (gP. 101).
Flash intensity control The flash intensity can be adjusted from +3 to –3. In some situations (e.g., when shooting small subjects, distant backgrounds, etc.), you may get better results by adjusting the amount of light emitted by the flash (“flash intensity”). It is useful when you intend to increase the contrast (distinction between light and dark) of images to make the images more vivid.
Flash bracketing The camera shoots multiple frames, changing the amount of light emitted by the flash for each shot. The camera shoots 3 frames at a time with the following amount of light: optimum light, light adjusted in the – direction, and light adjusted in the + direction. MENU [X] [FL BKT] Menu • The compensation value will change according to the EV step. g“EV STEP” (P. 103) • In single-frame shooting, the amount of light emitted by the flash changes every time the shutter button is pressed.
Using the external electronic flash Be sure to attach the flash to the camera before turning on the flash’s power. 1 Remove the hot shoe cover by sliding it in the direction indicated by the arrow in the illustration. Hot shoe cover • Keep the shoe cover in a safe place to avoid losing it, and put it back on the camera after flash shooting. 2 3 4 5 6 x • If the lock pin is protruding, turn the shoe lock ring as far as it will go in the direction opposite to LOCK.
Shooting with the Olympus wireless RC flash system Wireless flash shooting is possible with the Olympus wireless RC flash system. With this wireless flash system, you can take pictures using multiple wireless flashes and control the flashes in three groups (A, B, and C). The built-in flash is used to communicate between the camera and the external flashes. For details on using the wireless flash, see the manual of the external flash.
4 Use the super control panel to set the flash mode and other settings for each group. Flash intensity value Group • Select the flash control mode and adjust the flash intensity individually for groups A, B, and C. For MANUAL, select the flash intensity. Normal flash / Super FP flash • Switch between normal flash and Super FP flash. 2007. 12.16 TTL M OFF Flash control mode 5 6 7 8 x +1.
Using commercially available flashes You cannot use the camera to adjust the amount of light emitted from a commercially available flash except for a flash specified for use with this camera. To use a commercially available flash, connect it to the hot shoe or connect the synchronization cord to the external flash connector. Set the camera’s shooting mode to M. For details on non-specified commercial flashes, see “Non-specified commercial flashes” (gP. 84).
7 Playback functions Single-frame / Close-up playback The basic procedure for viewing pictures are as shown below. However, before using any of these functions, follow Step 1 below. You can set the camera to automatically switch to single-frame playback mode after shooting. g“REC VIEW” (P. 108) 1 Press the q button (Single-frame playback). < button j • The last recorded image appears. • The LCD monitor turns off after more than 1 minute if no operations are performed.
Light box display You can view the playback image and another image together on the left and right sides of the monitor. This is useful if you want to compare images you recorded using bracketing. 1 2 3 Press the P button while viewing an image. < button P button • The frame being viewed is displayed on the left side of the monitor, and the next frame is displayed on the right side. The image is displayed at the same magnification of the image being viewed.
Index display / Calendar display This function lets you show several images on the monitor at the same time. This is useful when you want to quickly search a number of pictures to find a particular image. During single-frame playback, each time you turn the dial toward G, the number of images shown changes from 4 to 9 to 16 to 25. b : Moves to the previous frame d : Moves to the next frame a : Moves to the upper frame c : Moves to the lower frame j • To return to single-frame playback, turn the dial to U.
Information display This allows you to display detailed information about the image. Luminance information can also be displayed with histogram and highlight graphs. Press the INFO button repeatedly until the desired information is displayed. • This setting is stored and will be shown the next time the information display is called up.
Slideshow This function displays images stored on the card one after another. Images are displayed one by one for about 5 seconds starting from the currently displayed image. Slideshow can be performed using index display. You can select the number of frames displayed during slideshow from 1, 4, 9, 16 or 25. 1 2 MENU [q] [m] Use p to set.
Playback on TV Use the video cable provided with the camera to play back recorded images on your TV. 1 2 3 x 7 Playback functions 90 EN Turn the camera and TV off, and connect the video cable as illustrated. Turn on the TV and set it to the video input mode. For details on switching to the video input mode, refer to the TV’s manual. Turn the camera on and press the q (playback) button. q button VIDEO OUT jack Notes • To connect the camera to a TV, use the provided video cable.
Editing still images Recorded images can be edited and saved as new images. Available editing functions depend on the image format (image record mode). A JPEG file can be printed as is without modification. A RAW file, on the other hand cannot be printed as is. To print a RAW file, use the RAW edit function to convert the RAW data format to JPEG.
Copying images This function lets you copy images to and from the xD-Picture Card and CompactFlash or Microdrive. This menu can be selected if both cards are inserted. The selected card is the copying source. g“CF / xD” (P. 107) Single-frame copy 1 2 Play back the image you want to copy and press the COPY / < button. Use ac to select [YES], then press the i button.
Protecting images Protect images you do not want to erase. Protected images cannot be erased by the singleframe or all-frame erase function. Single-frame protect Play back the image you want to protect and press the 0 button. 0 button • 9 (protect mark) is displayed on the top right corner of the screen. To cancel the protection Display the images that are protected and press the 0 button.
Erasing images Lets you erase recorded images. You can select single-frame erase, which erases only the currently displayed image; all-frame erase, which erases all the images stored on the card; or selected frame erase, which erases only the frames selected. x Notes • When you perform all-frame or selected frame erase on images recorded using RAW+JPEG, both the RAW and JPEG images are erased. When using single-frame erase, you can select whether to erase the JPEG, RAW, or both RAW and JPEG images.
Erasing selected frames This function lets you erase selected images at one time during single-frame playback or index display. 1 2 3 4 Display the images you want to erase and press the i button. • The selected images will be shown with red frames. • To cancel your selection, press the i button again. • During index display, press p to select the images you want to erase and press the i button. Press p to display the next images you want to erase and press the i button.
8 Customizing your camera Use the custom menus to customize the camera for ease of use. Use Custom Menu 1 to customize the shooting functions and Custom Menu 2 to set the basic camera functions. Custom Menu 1 has 9 tabs (a to i) that are divided according to the functions to be set. AF/MF BUTTON/DIAL RELEASE/ DISP/8/PC EXP/e/ISO #CUSTOM CANCEL SELECT A DIAL C AEL/AFL MEMO D F BUTTON TIMER Use ac to select [Y], then press d.
P SET UP Selects the operation of the dials or arrow pad when selecting the AF target. [OFF] Stops after moving to the AF target on the end. [LOOP] After moving to the AF target on the end, moves to the AF target on the opposite end of the same row or column. Selects all AF targets before moving to the AF target on the opposite end, and [AF AREA] is set to B. [SPIRAL] After moving to the AF target on the end, moves to the AF target on the opposite end of the next row or column.
• [F] on [MENU] means the horizontal operation of the dial (the same as pressing bd). [G] means the vertical operation of the dial (the same as pressing ac). DIAL MENU F CANCEL G SELECT bd AEL / AFL GO ac You can use the AEL / AFL button to perform AF or metering operations instead of using the shutter button. Select the function of the button to match the operation when the shutter button is pressed. Select [mode1] to [mode4] in each focus mode. (You can only select [mode4] in C-AF mode.
AEL / AFL MEMO You can lock and maintain the exposure by pressing the AEL / AFL button. [ON] Press the AEL / AFL button to lock and maintain the exposure. Press again to cancel the maintaining of the exposure. [OFF] The exposure will be locked only while the AEL / AFL button is pressed. ; FUNCTION 8 Customizing your camera You can assign a function to the < button. [PREVIEW] / [LIVE PREVIEW] (electronic) While holding down the < button, you can use the preview function. g“Preview function” (P.
MY MODE SETUP You can store two frequently used settings as My Mode. There are two basic ways to shoot with the registered My Mode settings. • Use the MODE button to make the settings. g“My Mode shooting” (P. 44) • Assign [MY MODE SETUP] to the < button. g“; FUNCTION” (P. 99) To shoot with My Mode using the < button, follow the steps under “Executing” below and set the My Mode you will use in advance. Registering 1) Select [MY MODE1] or [MY MODE2] and press d. 2) Select [SET] and press the i button.
Custom Menu 1 c RELEASE / j RLS PRIORITY S / RLS PRIORITY C Normally, this camera does not release the shutter while the AF is operating or the flash is charging. If you want to release the shutter without waiting until these operations have completed, use the setting below. You can set the release priority individually in AF mode. RLS PRIORITY S Sets release priority for S-AF mode gP. 53. RLS PRIORITY C Sets release priority for C-AF mode gP. 53.
USB MODE You can connect the camera directly to a computer or printer with the provided USB cable. If you specify the device you are connecting to beforehand, you can skip the USB connection setting procedure normally required every time you connect the cable to the camera. For details on how to connect the camera to either device, refer to “Connecting the camera to a printer” (gP. 112) and “Connecting the camera to a computer” (gP. 116).
Custom Menu 1 e EXP / e / ISO EV STEP You can select the EV step for exposure parameter setting, such as shutter speed, aperture value, or exposure compensation value, from [1/3 EV], [1/2 EV], or [1 EV]. ISO STEP You can select the EV step of the ISO sensitivity from [1/3 EV] or [1 EV]. ISO-AUTO SET You can set the upper limit and default ISO values when ISO is set to [AUTO]. [HIGH LIMIT] This sets the upper limit of the ISO value that automatically changes.
Custom Menu 1 g K / COLOR / WB ALL > You can apply the same compensation value to all the white balance modes at once. [ALL SET] The same compensation value applies to all WB modes. [ALL RESET] The WB compensation value settings applied to each WB mode are all cleared at once. If you select [ALL SET] 1) Use bd to select the color direction. Toward A: Amber-Blue / Toward G: Green-Magenta 2) Use ac to set the compensation value. g“WB compensation” (P. 69) Releasing the AEL / AFL button takes a sample image.
K SET You can combine 3 image sizes and 4 compression rates and register 4 combinations. Select the registered setting with [K]. g“Selecting the record mode” (P. 65) Register 4 different combinations of image settings. DSET 1 Set the number of pixels. 2 3 Y SF X F W N PIXEL COUNT CANCEL SELECT 4 W SF Yarge GO Set the compression rate. PIXEL COUNT You can set the pixel size for the image size [X], [W]. [Xiddle] Select [3200 x 2400], [2560 x 1920], or [1600 x 1200].
FILE NAME When you take a picture, the camera assigns it a unique file name and saves it in a folder. File names are assigned as shown in the illustration below. All folders Folder name 000 OLYMP Folder number (100 – 999) File name Pmdd0000.jpg Day (01 – 31) Color space P: sRGB _: Adobe RGB File number (0001 – 9999) After taking 9999 pictures, the counter is reset to 0001 for the next picture, the folder number increments by 1 to name and create a new folder where the next image (file) is stored.
Custom Menu 1 i K UTILITY EXT. WB DETECT You can disable the white balance sensor used to determine the light source during auto white balance. This is useful when the light source near the sensor and the light source illuminating the subject are different. Custom Menu 2 CF / xD You can select which card to use when both a CompactFlash and xD-Picture Card are loaded. EDIT FILENAME You can rename image files to make them easier to identify and organize.
VIDEO OUT You can select NTSC or PAL according to your TV’s video signal type. You will need to set this when you want to connect the camera to a TV and play back images in a foreign country. Make sure the correct video signal type is selected before connecting the video cable. If you use the wrong video signal type, recorded pictures will not play back properly on your TV. TV video signal types in major countries and regions Check the video signal type before connecting the camera to your TV.
9 Printing Print reservation (DPOF) Print reservation Print reservation allows you to save printing data (the number of prints and the date / time information) with the pictures stored on the card. Pictures set with print reservation can be printed using the following methods. Printing using a DPOF-compatible photo lab You can print the pictures using the print reservation data. Printing using a DPOF-compatible printer Pictures can be printed directly from a dedicated printer without using a PC.
3 Press bd to select the frame that you want to set as print reservation, then press ca to set the number of prints. • To set print reservation for several pictures, repeat this step. 4 5 Press the i button when you have finished. • The menu screen for single-frame reservation appears. CANCEL SELECT GO Select the date and time format and press the i button. [NO] [DATE] [TIME] The pictures are printed without the date and time. The pictures are printed with the shooting date.
Resetting the print reservation data You can reset all print reservation data or just the data for selected pictures. 1 MENU [q] [<] Resetting the print reservation data for all pictures 2 3 Select [<] or [U] and press the i button. Select [RESET] and press the i button. PRINT ORDER SETTING Resetting the print reservation data for a selected picture 2 3 4 5 6 7 Select [<] and press the i button. Select [KEEP] and press the i button.
Connecting the camera to a printer Use the provided USB cable to connect the camera to a PictBridge-compatible printer. 1 Turn the printer on and connect the camera’s USB connector to the printer’s USB port with the USB cable. • For details on how to turn the printer on and the position of the USB port, refer to the printer’s manual. USB cable 2 3 Turn on the camera. • The selection screen for the USB connection is displayed. Use p to select [EASY PRINT] or [CUSTOM PRINT].
Custom printing 1 Follow the operation guide to set a print option. PRINT MODE SELECT PRINT ALL PRINT MULTI PRINT ALL INDEX PRINT ORDER Follow the operation guide displayed here. EXIT SELECT GO Selecting the print mode Select the type of printing (print mode). The available print modes are as shown below. [PRINT] Prints selected pictures. [ALL PRINT] Prints all the pictures stored in the card and makes one print for each picture.
Selecting pictures you want to print Select pictures you want to print. The selected pictures can be printed later (single-frame reservation) or the picture you are displaying can be printed right away. [PRINT] (f) Prints the currently displayed picture. If there is a picture that [SINGLE PRINT] reservation has already been applied to, only that reserved picture will be printed. [SINGLE PRINT] (t) Applies print reservation to the currently displayed picture.
10 Using the OLYMPUS Master software Flowchart Just connect the camera to a computer with the USB cable and you can easily transfer images stored on the card to the computer with the provided OLYMPUS Master software. Things to prepare • OLYMPUS Master 2 CD-ROM • USB cable • Computer that fulfills the operating environment (For the required operating environment, refer to the OLYMPUS Master installation guide.
Connecting the camera to a computer Connect the camera to your computer with the provided USB cable. 1 Use the provided USB cable to connect the computer’s USB port to the camera’s USB connector. • The location of the USB port varies with the computer. For details, refer to your computer’s manual. Look for this mark. Terminal USB port USB cable Using the OLYMPUS Master software 10 116 EN 2 3 4 Smaller terminal Set the camera’s power switch to ON.
Start up the OLYMPUS Master software Windows 1 Double-click the “OLYMPUS Master 2” icon on the desktop. Macintosh 1 Double-click the “OLYMPUS Master 2” icon in the “OLYMPUS Master 2” folder. • The browse window is displayed. • When OLYMPUS Master is started up for the first time after installation, the OLYMPUS Master initial setting screen and user registration screen are displayed before the browse window. Follow the on-screen instructions. To exit OLYMPUS Master 1 Click “Exit” on any window.
Disconnecting the camera from your computer 1 Make sure that the card access lamp has stopped blinking. Card access lamp 2 Prepare to remove the USB cable. Windows 1) In the system tray, click the “Unplug or Eject Hardware” icon . 2) Click on the pop-up message. 3) Click “OK” on the “Safe to Remove Hardware” window. Using the OLYMPUS Master software 10 118 EN Macintosh 3 x 1) The trash icon changes to the eject icon when the “Untitled” or “NO_NAME” icon on the desktop is dragged.
Viewing still images 1 2 Click the “Album” tab on the browse window and select the album that you want to view. Thumbnail • The selected album image is displayed in the thumbnail area. Double-click the still picture thumbnail that you want to view. • OLYMPUS Master switches to the image edit window and the picture is enlarged. • Click “Back” to return to the browse window.
8 9 Click and select a language. Click “Add”. • The new language is downloaded to your camera. Please do not remove any cable or the battery while the camera is processing. 10 After the download procedure the camera display will show “OK”. You can remove the cables and turn power off. After restarting the camera you will be able to choose the new language from [W]. Transferring images to your computer without using OLYMPUS Master Your camera supports the USB Mass Storage Class.
11 Shooting tips and maintenance Shooting tips and information Tips before you start taking pictures The camera does not turn on even when a battery is loaded The battery is not fully charged • Charge the battery with the charger. The battery is temporarily unable to function because of the cold • Battery performance declines in low temperatures, and the charge may not be sufficient to turn on the camera. Remove the battery and warm it by putting it in your pocket for a while.
Shooting tips Focusing on the subject There are several ways to focus, depending on the subject. AF target is not focused on the subject • Use focus lock to focus the AF target on the subject. g“Focus lock – If correct focus cannot be obtained” (P. 58) Other things instead of the subject are in focus on the respective AF targets • Set [AF AREA] to M and focus on the selected AF target. g“AF target selection” (P.
Taking pictures with less flash When using auto flash, the flash will light up automatically when it is not bright enough. If the subject is too far away, the flash may have no effect. Here is how to take pictures without the flash in this type of situation. Setting the image stabilizer function • This function reduces camera shake, enabling you to hold the camera and take pictures in low light situations with the flash off. g“Image stabilizer” (P.
Taking pictures of a subject against backlight If the background is too bright compared to the subject, the exposure will be affected at the bright parts and the subject will appear darker. This is because the camera determines the exposure from the brightness of the whole screen. • Set [METERING] to [n] (spot metering) to measure the exposure of the subject in the center of the picture. To change the composition, place the subject in the center of the picture.
Functions that cannot be selected from menus Some items may not be selectable from the menus when using the arrow pad. • Items that cannot be set with the current shooting mode. • Items that cannot be set because of an item that has already been set: Combination of [l] and [NOISE REDUCT.], etc. Selecting the optimal record mode Record modes are divided into 2 main types: RAW and JPEG. RAW records without reflecting the settings for white balance, contrast, etc. on the images themselves.
Playback tips Understanding the settings and other information of pictures taken Play back a picture, and press the INFO button. Press the button repeatedly to change the amount of information displayed. g“Information display” (P. 88) Viewing pictures on a computer Viewing the entire picture on a computer screen The size of the picture displayed on a computer screen changes depending on the computer settings.
Viewfinder indications No indication Control panel indications Monitor indications No indication CARD FULL Possible cause Corrective action The card has no available memory. Print reservations and new data cannot be recorded to the card. Replace the card or erase unwanted pictures. Before erasing, download important images to a PC. xD-Picture Cards cannot be read or is not formatted. • Select [xD CARD CLEAN], press the i button and turn off the camera.
Viewfinder indications Control panel indications No indication No indication No indication No indication No indication No indication Monitor indications BATTERY EMPTY Possible cause The battery is drained. Corrective action Charge the battery. The camera is not Disconnect the camera and connect it again connected to the correctly. computer or NO CONNECTION printer correctly. There is no paper in the printer. Load some paper in the printer. The printer has run out of ink.
Camera maintenance Cleaning and storing the camera Cleaning the camera Turn off the camera and remove the battery before cleaning the camera. Exterior: • Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the camera at the beach, use a cloth soaked in clean water and well wrung. Monitor and viewfinder: • Wipe gently with a soft cloth.
Cleaning mode – Removing dust If dust or dirt gets on the image pickup device, black dots may appear in the picture. Contact your Olympus Authorized Service Center to have the image pickup device physically cleaned. The image pickup device is a precision device and is easily damaged. When cleaning the image pickup device yourself, be sure to follow the instructions below. If power runs out during cleaning, the shutter will close, which may cause the shutter curtain and mirror to break.
12 Information Main optional accessories You can use the following Olympus accessories with this camera. Power supply HLD-4 Power battery holder Attach the power battery holder and use it as a grip for taking pictures with the camera held vertically. It enables you to use the camera for a long period of time. 1 2 To attach the power battery holder to the camera, remove the camera’s battery cover, as shown in the diagram to the left.
Card basics Usable cards “Card” in this manual refers to a recording medium. This camera can use CompactFlash, Microdrive or xD-Picture Card (optional). CompactFlash Microdrive xD-Picture Card A CompactFlash is a largecapacity solid state flash memory card. You can use commercially available cards. A Microdrive is a medium that uses a large-capacity compact hard disk drive. You can use a Microdrive that supports CF+Type II (CompactFlash extension standard).
Formatting the card Non-Olympus cards or cards formatted on a computer must be formatted with the camera before they can be used. All data stored on the card, including protected images, is erased when the card is formatted. When formatting a used card, confirm there are no images that you still want to keep on the card. 1 2 3 MENU [W] [CARD SETUP] Use ac to select [FORMAT], then press the i button. Use ac to select [YES], then press the i button. CARD SETUP ALL ERASE • Formatting is performed.
Using your charger abroad z The charger and AC adapter can be used in most home electrical sources within the range of 100 V to 240 V AC (50 / 60 Hz) around the world. However, depending on the country or area you are in, the AC wall outlet may be shaped differently and the charger may require a plug adapter to match the wall outlet. For details, ask at your local electrical shop or travel agent. z Do not use commercially available travel adaptors as the charger or AC adapter may malfunction.
ZUIKO DIGITAL lens specifications Names of parts 1 Hood mount section 2 Filter mount thread 3 Zoom ring 4 Focus ring 5 Mount index 6 Electrical contacts 7 Front cap 8 Rear cap 9 Lens hood Attaching the hood Storing the hood • Use the hood when shooting a backlit subject. Main Specifications Items 12 – 60 mm Mount 50 – 200 mm FOUR THIRDS mount Focal distance 12 – 60 mm Max. aperture f2.8 – 4.0 f2.8 – 3.5 Image angle 84° – 20° 24° – 6.
Can be used with the optional EX-25 extension tube under the following conditions. The focus adjustment when EX-25 is used will be MF. Lens, focal distance 12 – 60 mm 12 mm Shooting range Shooting is not possible since subjects cannot be brought into focus at this focal length. 60 mm 50 – 200 mm Magnification ( ): Calculated based on 35 mm film camera 21.0 cm – 25.5 cm 0.43 – 0.58x (0.86 – 1.16x) Can be shot in the whole zoom range 0.12 – 0.49x (0.24 – 0.
Flash synchronization and shutter speed Shooting mode Shutter speed Flash timing Upper limit of synchronization timing*1 Fixed timing when flash fires*2 P 60 – 1/8000 sec. 1/ (lens focal length x 2) or synchronization timing, whichever is slower 1/250 1/60 A 60 – 1/8000 sec. 1/ (lens focal length x 2) or synchronization timing, whichever is slower 1/250 1/60 S 60 – 1/8000 sec. The set shutter speed 1/250 k M 60 – 1/8000 sec.
Flash distance The flash distances when shooting with the built-in flash according to the ISO sensitivity / aperture value settings are as follows. Aperture value ISO sensitivity 3200 1600 800 400 200 100 Flash distance (m) f8 f5.6 f4 f2.8 f2 f1.4 f11 f8 f5.6 f4 f2.8 f2 9.3 6.5 f16 f11 f8 f5.6 f4 f2.8 4.6 f22 f16 f11 f8 f5.6 f4 3.3 f32 f22 f16 f11 f8 f5.6 2.3 f32 f22 f16 f11 f8 1.6 f32 f22 f16 f11 1.2 f32 f22 f16 0.8 f32 f22 0.
Flash modes that can be set by shooting mode Shooting mode Viewfinder indications Control panel indications Super control panel indications # AUTO ! P A X Y Flash mode Conditions for Shutter firing the flash speed limit Fires automatically in dark / backlit * 1/30 sec. – Auto flash 1st curtain 1/250 sec.
Shooting mode S M Viewfinder indications Control panel indications 2nd CURTAIN Super control panel indications Flash mode # Fill-in flash H Fill-in flash (red-eye reduction) Flash timing 1st curtain Always fires 60 sec. – 1/250 sec. k k Always fires 60 sec. – 1/250 sec.
Record mode and file size / number of storable still pictures The file size in the table is approximate. Record mode Number of pixels (PIXEL COUNT) RAW YSF YF 3648 x 2736 File format File size (MB) Number of storable still pictures (with 1GB xDPicture Card) Loss-less compression ORF Approx. 11 1191 1/2.7 Approx. 6.8 1147 1/4 Approx. 4.7 1211 YN 1/8 Approx. 2.2 1460 YB 1/12 Approx. 1.5 1687 XSF 1/2.7 Approx. 5.3 1187 1/4 Approx. 3.7 1267 XF 3200 x 2400 1/8 Approx. 1.
Functions that can be registered with My Mode and Custom Reset Setting My Mode registration Custom reset setting registration Function My Mode registration Custom reset setting registration Shooting mode 9 k F 9 9 O fps k 9 8 k Image stabilizer k 9 9 SLEEP k < / Y / j* 9 9 9 BACKLIT LCD k 9 AF MODE 9 9 4 h TIMER k k AF AREA 9 9 USB MODE k k AE BKT 9 9 LIVE VIEW BOOST 9 9 ISO BKT 9 9 FRAME ASSIST k 9 WB BKT 9 9 EV STEP k 9 FL BKT 9 9 ISO STEP k
Menu directory Shooting Menu Tab Function CARD SETUP Setting ALL ERASE / FORMAT Ref. page P. 95 P. 133 RESET CUSTOM RESET RESET1 SET / RESET RESET2 SET / RESET P. 32 PICTURE MODE hVIVID / iNATURAL* / jMUTED / ZPORTRAIT / MONOTONE / CUSTOM GRADATION AUTO / NORMAL* / HIGH KEY / LOW KEY P. 73 K RAW / YF / YN* / XN / WN / RAW + YF / RAW + YN / RAW + XN / RAW + WN P.
Playback Menu Tab Function q Setting Ref. page m K/L/M/N/O P. 89 y OFF / ON* P. 89 RAW DATA EDIT EDIT Q / SHADOW ADJ JPEG EDIT <
Tab d Function 8 e P. 101 OFF / ON* OFF / 1 MIN* / 3 MIN / 5 MIN / 10 MIN P. 101 8 SEC* / 30 SEC / 1 MIN / HOLD P. 101 4 h TIMER OFF / 4 h* P. 101 USB MODE AUTO* / STORAGE / MTP / CONTROL /
Custom Menu 2 Tab Function Setting Ref. page X k P. 15 CF / xD CF* / xD P. 107 EDIT FILENAME Adobe RGB sRGB OFF* / A – Z / 0 – 9 P. 107 s AUTO* / –7 – +7 P. 107 W *1 P. 107 VIDEO OUT *1 P. 108 REC VIEW OFF / AUTOq / 1 SEC – 20 SEC (5 SEC*) P. 108 PIXEL MAPPING k P. 130 FIRMWARE k P. 108 * Factory default setting *1 Settings differ depending on the region where the camera is purchased.
Information Compression rate Compression is a method of reducing file size by abbreviating some contents of data, and compression rate denotes the amount of compression. The actual effect of the selected compression rate could vary with the content of the image. The numbers for the compression rate selected with this camera provide only a general scale for reference and are not precise measurements.
P (Program) Mode Also called Program AE mode. The camera automatically sets the best shutter speed and aperture for the shot. PictBridge A standard that enables digital cameras and printers made by different manufacturers to be connected, and also allows pictures to be printed directly from the camera. Pixels A pixel is the smallest unit (dot) used to make up an image. Clear large-sized printed images require millions of pixels.
Specifications Camera specifications Product type Product type Lens Lens mount Equivalent focal length on a 35 mm film camera : Single-lens reflex digital camera with interchangeable lens system : Zuiko Digital, Four Thirds System Lens : Four Thirds mount : Approx. twice the focal length of the lens Image pickup device Product type No. of total pixels No. of effective pixels Screen size Aspect ratio : : : : : 4/3" Live MOS sensor Approx. 11,800,000 pixels Approx. 10,100,000 pixels 17.3 mm (H) x 13.
ISO sensitivity Exposure compensation : 100 – 3200 (1/3, 1 EV step) : ±5 EV (1/3, 1/2, 1 EV step) White balance Product type Mode setting : Image pickup device and white balance sensor : Auto, Preset WB (8 settings), Customized WB, One-touch WB (4 settings) Recording Memory Recording system Applicable standards : CF card (Compatible with Type I and II) Microdrive (Compatible with FAT 16/32) xD-Picture Card : Digital recording, JPEG (in accordance with Design rule for Camera File system [DCF]), RAW
Battery / charger specifications BLM-1 Lithium ion battery MODEL NO. Product type Nominal voltage Nominal capacity No. of charge and discharge times Ambient temperature Dimensions Weight : : : : PS-BLM1 Rechargeable Lithium ion battery DC 7.2 V 1500 mAh : Approx. 500 times (varies with usage conditions) : 0°C – 40°C (32°F – 104°F) (charging) –10°C – 60°C (14°F – 140°F) (operation) –20°C – 35°C (–4°F – 95°F) (storage) : Approx. 39 mm (W) x 55 mm (D) x 21.5 mm (H) (1.5" x 2.2" x 0.8") : Approx. 75 g (0.
E-System Chart Standard Lens ZUIKO DIGITAL ED 14-42 mm 1:3.5-5.6 Standard Zoom ) 1 Compatible with EX-25* Extension Tube only at 25-42 mm EC-14*/EC-20* Tele Converter ZUIKO DIGITAL 17.5-45 mm 1:3.5-5.6 Standard Zoom (only available in special kit) Compatible with EX-25* EC-14*/EC-20* Extension Tube only at 28-45 mm Tele Converter TF-22 Twin Flash with adapter ring 52 mm to 67 mm/72 mm Standard Lens ZUIKO DIGITAL 35 mm 1:3.5 Macro Lens ZUIKO DIGITAL ED 40-150 mm 1:4.0-5.
Remote control Adapter ZUIKO DIGITAL 1.4x Teleconverter EC-14 ZUIKO DIGITAL 2.0x Teleconverter EC-20 EX-25 MF-1 Extension Tube RM-1 OM-Adapter RM-CB1 Remote Control Remote Cable Flash SRF-11 Ring Flash Set (incl. FC-1 / RF-11) FL-CB05 RF-11 Flash Cable FL-50R FL-36R Wireless Flash Wireless Flash Ring Flash FL-20 Flash FC-1 FR-1 Macro Flash Controller Flash Adapter Ring for 35/50 mm Macro TF-22 Twin Flash FLST-1 Flash Stand (incl.
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL. An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product.
Product Handling Precautions WARNING ( Do not use the camera near flammable or explosive gases. ( Do not use the flash and LED on people (infants, small children, etc.) at close range. • You must be at least 1 m (3 ft.) away from the faces of your subjects. Firing the flash too close to the subject’s eyes could cause a momentary loss of vision. ( Keep young children and infants away from the camera.
WARNING • Keep batteries dry at all times. • To prevent batteries from leaking, overheating, or causing a fire or explosion, use only batteries recommended for use with this product. • Insert the battery carefully as described in the operating instructions. • If rechargeable batteries have not been recharged within the specified time, stop charging them and do not use them. • Do not use a battery if it is cracked or broken.
LCD Monitor • Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playback mode failure or damage to the monitor. • A strip of light may appear on the top / bottom of the monitor, but this is not a malfunction. • When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the monitor. This is not a malfunction; it will be less noticeable in playback mode.
FCC Notice • Radio and Television Interference Changes or modifications not expressly approved by the manufacturer may void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
For customers in Europe “CE” mark indicates that this product complies with the European requirements for safety, health, environment and customer protection. “CE” mark cameras are intended for sales in Europe. This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please do not throw the equipment into the domestic refuse.
Notes regarding warranty maintenance 1. This warranty will only be valid if the Warranty Certificate is duly completed by Olympus or an authorized dealer or other documents contain sufficient proof. Therefore, please make sure that your name, the name of the dealer, the serial number and the year, month and date of purchase are all completed or the original invoice or the sales receipt (indicating the dealer’s name, the date of purchase and product type) is attached to this Warranty Certificate.
Index Symbols A ............................................................... w+F ................................................................ o (Image stabilizer) .......................................... W (Language selection) ............................... 8 (Beep sound) ................................................ < CUSTOM ....................................................... Y Custom Menu 1 .............................................. Z Custom Menu 2 ....................................
F F (Fine) ......................................................... 65, 125 FILE NAME ........................................................ 106 Fill-in flash # ..................................................... 76 FIRMWARE ........................................................ 108 FL BKT ............................................................... 80 Flash bracketing ................................................. 80 Flash intensity control w ..................................
SATURATION ..................................................... 72 Self-timer Y ....................................................... 60 Sequential shooting H l ............................... 59 Sequential shooting L O ................................ 59 SF (Super Fine) ............................................ 65, 125 SHADING COMP. ............................................... 104 SHADOW ADJ ................................................... 91 SHARPNESS ..........................................
