Basic manual

35
En
 Protect (Protecting Images Against Accidental Erasure)
It is highly recommended that you protect important pictures to avoid
accidentally erasing them. Protected pictures cannot be erased by the single-
frame/all-frame erase function.
1 Display the picture you want to protect by using the arrow pad.
2 Press . The picture is now protected.
● To cancel protection, press again.
 Single-Frame Erase
1 Select a picture you wish to erase by using the arrow pad.
● If the picture is protected, cancel the protection first.
2 Press the (erase) button. The ERASE screen is displayed.
3 Press Ñ to select YES.
4 Press to erase the picture.
● To cancel erasing, select NO in step 3 and press , or press the button
again.
 All-Frame Erase
This function erases all still pictures and movies on the card, except protected
ones.
1 In the top menu, select MODE MENU T CARD T CARD SETUP T
ALL ERASE.
2 Press í. The CARD SETUP screen is displayed.
3 Press Ñ to select ALL ERASE, then press . The ALL ERASE
screen is displayed.
4 Press Ñ to select YES.
5 Press to start erasing.
● A bar is displayed to show the progress of erasing.
● To cancel erasing, select NO in step 4 and press .
Mode dial
setting
Mode dial
setting
Mode dial
setting
1 C4000ZBasic-E1 02.6.17 10:44 AM Page 35