User guide

Table Of Contents
6
Playback
80
Formatting
This function lets you format the memory card. Formatting prepares cards
to receive data. Before using non-OLYMPUS cards or cards which have
been formatted on a computer, you must format them with this camera.
All existing data, including protected pictures, are erased when the
card is formatted. Make sure that you save or transfer important data
to a computer before formatting the card.
Top menu [MODE MENU] [CARD] [FORMAT] g“Menus” (P.12)
1 Select [YES] and press e.
The [BUSY] bar is displayed while the
card is formatted.
Note
Do not do any of the following during formatting as such actions may damage
the card.
Open the battery compartment/connector cover, remove the battery, or
connect or disconnect the AC adapter (regardless of whether there is a
battery in the camera or not).
CAUTION ERASING ALL
NO
SELECT
GO
OK
YES
FORMAT