Datasheet
62 EN
Playback functions
4
Protecting selected frames
This function lets you protect selected images at one time during single-frame playback or
index display.
1
Display the images you want to protect and press the
i
button.
•
The selected images will be shown with red frames.
•
To cancel your selection, press the
i
button again.
•
During index display, press
p
to select the images you want to protect and press the
i
button.
2
Press
p
to display the next images you want to protect and press the
i
button.
3
After you have selected the images to protect, press the
0
(protect)
button.
Canceling all protections
This function lets you cancel the protection of several images at one time.
1
MENU
[
q
]
[RESET PROTECT]
2
Use
ac
to select [YES], then press
i
.
Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.
x Notes
• Formatting the card erases all images even if they have been protected. (gP. 94)
• Protected images cannot be rotated.
Erasing images
x Notes
• For image file types recorded using RAW+JPEG, single-frame erase erases only the JPEG
images while the RAW data is retained. For all-frame and selected frame erase, both the RAW
and JPEG images are erased.
• Protected images cannot be erased. Cancel protected images, then erase them.
• Once erased, images cannot be restored. g “Protecting images – Preventing accidental
erasure” (P. 61)