Datasheet

ManualsBrandsOlympus Manualsbridge cameras006358

Table Of Contents

Tips before you start taking pictures

If the correct focus cannot be obtained

The camera automatically detects the focus target in the frame. The level

of contrast is one of the criteria it uses to detect the subject. The camera

may fail to determine subjects with lower contrast than the surroundings or

with an area of extremely strong contrast in the frame. If this happens, the

simplest solution is to use the focus lock.

1 Position the AF target mark on

the subject you want to focus on.

• When shooting a hard-to-focus or fast-

moving subject, focus the camera on an

object about the same distance away as

the subject.

2 Press the shutter button halfway

until the green lamp lights.

• The green lamp lights when the focus

and exposure are locked.

• When the green lamp blinks, the focus

and exposure are not locked. Release your finger from the shutter button,

re-position the AF target mark on the subject and press the shutter button

halfway again.

3 Keeping the shutter button

pressed halfway, recompose

your shot.

4 Press the shutter button fully.

• The camera takes the picture. The

orange lamp blinks while the picture is

recorded.

How to focus (focus lock)

441600

1600

1200

SQ1

0.0

F4.0

1/200

AF target mark

Shutter button