Use Instructions
Table Of Contents
- 1 About this manual
- 2 Safety
- 3 Hinweise zum Aufstellen
- 4 Tools and accessories
- 5 Scope of supply
- 6 System diagram
- 7 Trays
- 8 Specifications
- 9 Unboxing
- 10 Mounting of components
- 11 Mounting fluorescence components
- 12 Assembly of the housing for scanner
4. If you are using the VS200 loader select the [Microscope] tab and select in
the [Sample loading] list the [VS200 MTL Slide Loader] entry.
18.1 Activate the motorized polarizer
All VS200 SLIDEVIEW systems are equipped with a polarization angle changer. By
default the functionality of the motorized polarizer is switched off.
1. Use the [Acquire] >[Devices] > [Device List] command to open the [Device
List] dialog box.
2. Select the [Transmitted light path] tab and select the [Polarization Angle
Changer] check box.
18.2 Activate the VS200 liquid dispenser
1. Use the [Acquire] >[Devices] > [Device List] command to open the [Device
List] dialog box.
2. Select the [Microscope] tab.
3. Make sure that the check box [VS200 Liquid Dispenser] is selected.
- 86 -
Instructions for use
18 VS200 device configuration
OLYMPUS VS200 System