Use Instructions
Table Of Contents
- 1 About this manual
- 2 Safety
- 3 Hinweise zum Aufstellen
- 4 Tools and accessories
- 5 Scope of supply
- 6 System diagram
- 7 Trays
- 8 Specifications
- 9 Unboxing
- 10 Mounting of components
- 11 Mounting fluorescence components
- 12 Assembly of the housing for scanner
11 Mounting fluorescence components
Finally the system should look like on the image below.
11.2 Fluorescence filter wheels or camera adapter for mono-
chrome camera
The units described below must be assembled and adjusted by Olympus. If these units are
assembled or adjusted by the customer, the operations are not ensured.
Depending on the customer’s configuration you either have to mount only one or
two fast filter wheels. The following chapter describes how to mount the different fil-
ter wheels.
11.2.1 U-FFWR (Motorized fast reflected light filter wheel)
The units described below must be assembled and adjusted by Olympus. If these units are
assembled or adjusted by the customer, the operations are not ensured.
- 45 -
Instructions for useOLYMPUS VS200 System