Use Instructions

19. Loosen the 2 hex screws (size 3mm) indicated in the figure. The screws
should only have been screwed hand tight.
20. Use the two adjustment screws indicated in the figure to align the bright
spot in the center of the cross hair.
21. Lock the field stop’s focus setting. To do so, tighten the hex screw (size 3
mm) loosened before.
22. Open the field stop completely. To do so, turn the adjustment ring shown
in the figure to the left as far as possible.
- 184 -
Instructions for use
24 Troubleshooting
OLYMPUS VS200 System