Use Instructions

5. Start the VS200 ASW software.
6. Take a tray with a slide in position 3.
7. On your software’s start page, click the [Exchange Trays] button to load
the tray.
8. Use the [Load Slide for Calibration] function to load the slide.
9. Make sure that the 2x objective is selected.
10. Starten Sie das Live-Bild in der VS200 ASWSoftware. To do so, go to the
[Manual Control] layout.
11. In the [Camera Control] tool window, click the [Live] button to start the live
image. Alternatively, you can also use the [F7] key.
12. Carry out an autofocus.
13. Change to the objective with the magnification 10x or 20x.
14. Carry out an autofocus again.
15. Turn the adjustment ring indicated in the figure to close the field stop as far
as possible.
You should now see a bright spot somewhere in the live image. The
spot may appear polygonal (10 edges).
Display a cross hair in the live image to help with centering. To do so,
use the [View] > [Cross Hair] command in the VS200 ASW software.
- 182 -
Instructions for use
24 Troubleshooting
OLYMPUS VS200 System