Use Instructions
Table Of Contents
- 20 Calibrate VS200 using the Olympus Calibration Slide
- 21 Additional calibrations for a fluorescence system
20.3 Camera-To-Stage Rotation
The standard for the camera-to-stage rotation is +/- 0.1°. However the
closer you get to zero the better.
1. Select the [Camera-To-Stage Rotation] entry.
2. Click the [Calibrate] button to start the wizard.
3. Use the stage navigator to move to the center of the calibration slide as
shown in the image below.
4. Select the 10x or 20x objective from the menu bar.
- 110 -
Instructions for use
20 Calibrate VS200 using the Olympus Calibration Slide
OLYMPUS VS200 System