Use Instructions

20 Calibrate VS200 using the Olympus Calibration Slide
3. Use the stage navigator to move to center (cross hair) of slide and auto-
focus.
4. Proceed with [Next].
5. Click the [Finish] button to finalize the calibration process.
In case the calibration value is not within the standard go back to the [Cam-
era-To-Stage Rotation] calibration and redo all calibrations.
ATTENTION
In case you have calibrated an immersion medium objective as well clean the
objective and remove immersion medium residues from the calibration slide.
See Immersion Objectives auf Seite 38.
- 137 -
Instructions for useOLYMPUS VS200 System