Use Instructions

2. Insert the tray by clicking the [Exchange Trays] button on the start page of
the VS200 ASW software.
If you use the loader put the tray in e.g. position 2.
3. Click the [Lock Door] button in the VS200 ASW software to lock the door.
4. Click the [Select Slide for Calibration] button on the start page of the VS200
ASW software.
5. Load the tray (either manually or using the loader) by clicking the [Load
Slide and Calibrate] button.
6. In the [View] layout select the [Acquire] > [Calibrations] command.
The [Calibrations] dialog box opens.
- 124 -
Instructions for use
20 Calibrate VS200 using the Olympus Calibration Slide
OLYMPUS VS200 System