Manual
OA-93/OA-96
&
Carbine Model 2 Reassem
If for any reason you unscrewed
the link pin from the bolt carrier
key, replace it now. Place one
drop of Red
Loctite®
in the for-
ward hole (1) and screw in link
pin (2) firmly.
1
.
2
.
3
.
insert link pin (2) into recoil rod link (4).
Lift access hatch (5) and slide in bolt carrier assembly (6).
U,
(If assembly binds, try turning your OA-93/OA-96 upside down).
Use the recoil
rod nut (7) to
__
e
.-.
compress the spring into the
a
I
.
recoil spring housing and
screw it down. If you have
Maintenance Procedures
difficulty gripping the nut,
insert a small hex wrench into
the
takedown
hole (8). BE
CAREFUL. The
recoil spring
will
shoot out the end of the
housing if pressure is removed.
II
P
8
4.
Tighten down the recoil rod set
screw
(9).
GO
TO PAGE 31
II
I