Manual
Maintenance Procedures
Bolt Carrier Disassembly
5.
Give bolt cam pin (5) a quarter-
turn and lift out.
6.
Remove bolt assembly (2) from
bolt carrier assembly (1).
NOTE: Disassemble extractor and
.
7.
8.
spring assembly only when
dirty or damaged.
Press top of extractor (6) to check
that spring works.
Use dummy round or ballpoin
pen to remove extractor pin (7).
CAUTION:
Do not separate insert
from
spring
assembly
(9).
9.
10
Remove extractor (8) and spring
assembly (9). Do not remove
spring assembly (9) from extrac-
tor (8).
Reassemble in reverse order. Be
sure to use Red Loctite when install-
ing flash suppressor (if removed)
and link pin (#1, page 20).