Manual

Maintenance Procedures
OA-93 Carbine Model 1 Reassembly
If for any reason you unscrewed
the link pin from the bolt carrier
key, replace it now. Place one
drop of Red
Loctite® in the for-
ward hole (1) and screw in link
pin
(2) firmly.
insert link pin (2) into recoil rod link (6).
(If assembly binds, try turning your
OA-93/OA-96 upside down.
REA OF
ETAIL
3.
Screw forward part of recoil
the pin drop into the slot on
rod (7) firmly onto rear part of
the end of the rear recoil rod.
recoil rod (8). 5. Turn locking pin (10) until it
4. Pull out and turn detent pin
snaps into the groove on the
(9) until you feel the paddle of
end of the recoil rod.
GO TO PAGE 31
28