Manual

Maintenance Procedures
Cleaning and Lubricating
Upper Receiver and Barrel Assembly
NOTE: Do not reverse direction of the bore brush while it is in the bore.
Use cleaner, lubricant and preservative (CLP) on the following areas:
A
.
B .
C .
D .
1 .
2.
Use cleaning rod, bore brush and CLP. Run rod through chamber, barrel
(1) and flash suppressor (2).
Install chamber brush on cleaning rod, dip in CLP, and insert in chamber
(4) and locking lugs (5). Clean by pushing and twisting cleaning rod.
22