Manual

Maintenance Procedures
OA-93/OA-96
and Carbine Model 2
Field-stripping Your OA-93/OA-96 & Carbine Model 2
2. Remove the recoil rod locking nut (2). If you
have difficulty gripping the nut, insert a small
hex wrench into the
takedown hole (3). BE
CAREFUL. The recoil spring will shoot out the
end of the housing as soon as the nut is
removed. Maintain pressure and ease the
spring tension gradually.
assembly out of the
rear of the upper
receiver.
GO TO PAGE 20, STEP 1
19